Parts

Crown races for Cane Creek headsets fit a variety of lowers and crown race seat diameters. - Compatible with 10-, 40- and 110-Series headsets and backwards compatible with S and XX Series - Integral mold seals keep out the elements - Compatible with 41 and 42mm lower headset bearings - Compatible with 30mm (1-1/8") straight steerer tubes - Lightweight aluminum construction

V2 dropper remote clamp for 22.2mm handlebar.

Jagwire's V-Brake Boot covers and seals the points where the the cable on your V-Brakes, linear-pull and direct-pull brakes enter the noodle. It's made of flexible rubber to seal the cable and help keep dirt, grit and moisture from entering. It keeps your cables and brakes working nice and smooth and ensures your cables last as long as possible. You get a bag of 10.

Power Links provide tool free chain assembly. - 8-speed width: 7.1mm - 9-speed width: 6.8mm - Chain Compatibility: SRAM - Reusable: Yes

Power links provide tool free chain assembly. - Chain Compatibility: SRAM - Reusable: No

ONLY COMPATIBLE WITH THE ONEUP REMOTE V3 Kit includes 1 dropper remote cushion

Designed for use with T-Type chains, the Eagle Transmission PowerLock provides the same rugged dependability as its predecessors. - For use with T-Type chains - No tools required for installation

- Wire hook for electronic shift and brake housing - 2.5mm E-Shift + 5.0mm Brake

Dimension Nylon Basic Toe Straps -Durable metal buckle -Multi-purpose strap can also be used as a lash strap for bike touring or rear rack (caution must be used to keep the strap tail out of the wheel) - 450mm

Keep housing, hose, and electronic wires tidy with Jagwire Wire Hooks. - 4mm / 5mm hooks - Connects 4mm shift housing, dropper housing, or E-bike control wire to 5mm brake housing or hydraulic hose - Pack of 4 hooks

Compatible with cantilever brakes, Jagwire's Mountain Sport Brake Pads boast Jagwire's tried-and-true all-weather compound for excellent speed control, stopping power and durability.

Cane Creek ZN40-Bearing 41.8mm 45 x 45 Zinc, Each from Cane Creek.

40-Series Bearing - Compatible with 110-, 40-, and 10-Series headsets

Crank Insurance compatible with HollowGram cranks. Features - Protects HollowGram crank arm from rock strikes - Reflective strip keeps riders visible

Dimension Toe Clips and Straps Set. Includes: - 4 bolts - 4 nuts (washers included) - 2 nylon toe straps - 2 toe clips

The Dura Type insert pad was originally developed as an aftermarket upgrade for high end Shimano brake systems. The Kool-Stop Dura pads are the same spec as Shimano pads and fit Shimano, SRAM, TRP and Tektro holders with a set screw. Compounds: - Black: Kool-Stop's standard compound which is great for all weather conditions, but designed for dry condition riding. - Ceramic: This compound was designed for ceramic coated rims and is great in all weather conditions. - Salmon: Kool-Stop's most famous Salmon compound is also one of the most aggressive compounds for extreme all weather conditions especially in the wet, but still superb in the dry. - Carbon: Kool-Stop's original carbon compound which works great for most carbon wheels but will wear quicker on fast steep descents. - Dual: A fusion of Kool-Stop's two finest compounds which will give superb braking in all weather conditions. This combination produces a more controlled smooth stop! Features: - Patented Plow Tip - Water Grooves - Rim Friendly Compounds - Fits 55mm length holders

Shimano Replacement pads for Mountain brake shoes - Shimano Cartridge-type mountain brake pads fit models: XTR BR-M970, BR-M960, BR-M951, BR-M950 XT BR-T780, BR-M770, BR-M760, BR-M750, BR-M739, BR-M737 LX BR-T670, BR-M580, BR-M570 Deore BR-M530, BR-M510 Alivio BR-M430, BR-MC18 Acera BR-M422, BR-M421, BR-M420, BR-M330, BR-T300 DXR BR-MX70 MX BR-M600 - M70CT4: Only for sidewall-machined rims; performs especially well in wet conditions and may pass DIN standard; tends to be low noise, low rim wear and fade - Color: Black - Intended Brake Type: Linear Pull - Pad Attachment Style: Threaded Post - Pad Type: Replacement Insert - Cartridge - Rim Compatibility: Standard

Shimano Replacement pads for Mountain brake shoes - Color: Black - Intended Brake Type: Linear Pull - Pad Attachment Style: Threaded Post - Pad Type: Replacement Insert - Cartridge - Rim Compatibility: Standard - Shimano Cartridge-type mountain brake pads fit models: XTR BR-M970, BR-M960, BR-M951, BR-M950 XT BR-T780, BR-M770, BR-M760, BR-M750, BR-M739, BR-M737 LX BR-T670, BR-M580, BR-M570 Deore BR-M530, BR-M510 Alivio BR-M430, BR-MC18 Acera BR-M422, BR-M421, BR-M420, BR-M330, BR-T300 DXR BR-MX70 MX BR-M600 - M70R2: Severe condition brake pad, high performance in dry or wet conditions

Crown races for Cane Creek headsets fit a variety of lowers and crown race seat diameters. - Compatible with 10-, 40- and 110-Series headsets and backwards compatible with S and XX Series - Integral mold seals keep out the elements - Compatible with 52mm lower headset bearings - Compatible with 30mm (1-1/8") straight steerer tubes - Lightweight aluminum construction - Allows the installation of a straight steerer fork without changing out the headset lower

Crown races for Cane Creek headsets fit a variety of lowers and crown race seat diameters. - Compatible with 10-, 40- and 110-Series headsets and backwards compatible with S and XX Series - Integral mold seals keep out the elements - Compatible with 52mm lower headset bearings - Compatible with 30mm (1-1/8") straight steerer tubes - Durable steel construction - Allows the installation of a straight steerer fork without changing out the headset lower

Crown races for Cane Creek headsets fit a variety of lowers and crown race seat diameters. - Compatible with 10-, 40- and 110-Series headsets and backwards compatible with S and XX Series - Integral mold seals keep out the elements - Durable steel construction

Elastomers are designed for use with eeSilk or eeSilk+ seatposts, featuring different durometers that provide different levels of comfort. - Cane Creek eeSilk+ Elastomer 1 - 40 Durometer, X-Soft

Elastomers are designed for use with eeSilk or eeSilk+ seatposts, featuring different durometers that provide different levels of comfort. - Cane Creek eeSilk+ Elastomer 3 - 50 Durometer, Soft

Elastomers are designed for use with eeSilk or eeSilk+ seatposts, featuring different durometers that provide different levels of comfort. - Cane Creek eeSilk+ Elastomer 7 - 70 Durometer, Firm

Elastomers are designed for use with eeSilk or eeSilk+ seatposts, featuring different durometers that provide different levels of comfort. - Cane Creek eeSilk+ Elastomer 9 - 80 Durometer, X-Firm

- Wears and functions like other links on the chain - SIL-TEC surface treatment - Tool free installation possible - TL-CN10 is available as SM-CN900-11 - Single use

Depending on the variant selected, these clamps/adapters allow users to mount their OneUp Components Dropper Remote (V2 or V3) to their Shimano I-SPEC-II brake lever (I-SPEC-II Adapter), Avid/SRAM MMX bar mount (SRAM MMX Adapter), Shimano I-Spec EV (I-Spec EV Adapter), flat bars (22.2 Clamp), or drop bars (31.8 clamp). The SRAM MMX, Shimano I-Spec EV, and the I-SPEC-II Adapters are not a clamps - these adapters allows the mounting/attachment of the remote body to a riders pre-existing clamp/brake mount. The 31.8 Clamp and the 22.2 Clamp are stand-alone clamps - these clamps allows the mounting/attachment of the remote body to a riders bars who do not have or do not want to attach the dropper remote body to a pre-existing clamp/brake mount. This product does not contain a remote body. This product is not a universal product, it will only work to attach/mount a OneUp Components Dropper Remote body (V2 or V3). The 31.8 Adapter is for use with drop bars only.

Replacement dropper post remote clamp. Can be used to convert existing clamp on the OneUp Dropper Remote. - Compatible with SRAM MatchMakerX (MMX) or Shimano I-Spec EV (M9100) brake mounts. - Does not contain remote body.

Replacement dropper post remote clamp. Can be used to convert existing clamp on the OneUp Dropper Remote. - Compatible with Shimano I-Spec EV (M9100, M8100, M7100) brake mounts. - Does not contain remote body.

- 7075-T6 aluminum direct mount spider or lockring to fit Race Face Cinch system splined cranks - RF-3296 spider is required for running 2-ring setups with Boost (Race Face 1x Direct Mount rings work fine with Boost) - Mounts using a common Park BBT-22 tool

SRAM's MRX Comp Twist Shifters are simple to use and offer solid shifting and reliable construction. They shift a 2:1 Shimano rear derailleur.

NASTRO AERO is a 1mm-thick die-cut SILCAthane tape for aero bars and extensions that provides improved comfort and ultimate grip in wet and dry conditions. Inspired by advancements in running shoe foam and F1 tires as well as our own research into rolling efficiency, impedance, and damping, we realized that new materials technology could allow for a significant improvement in bar tape. Using a laminate of SILCAthane, the tape can be optimized across a range of desired features. The resulting tape has a softer, more comfortable feel, higher wet and dry grip, better vibration isolation, and 3-5x the durability of existing tape materials. - 1mm thick grippers with high-performance 3M adhesive backing - Improves grip and comfort - Specifically designed for complex handlebars and aero extensions - Optimized for ultimate wet/dry grip while adding minimal frontal area

RockShox 32mm Seal Kit

Lock rings for all TRP Centerlock Rotors

Inline adjusters make on-the-fly derailleur cable tension adjustments safe and easy. - Indexed shifter adjustment, fits 4.0mm housing; not recommended for use with brake systems - Compact design improves performance when used on curved housing segments

More comfort, more control. Lightweight EVA foam and cork combine with a contemporary knurled texture twist – offering a stylish, comfortable, and durable finish to your bike. Where it thrives: The open road, gravel roads What it's built for: Grip, durability Highlights: - Comfortable, lightweight EVA foam absorbs road-buzz and feels great - Natural cork elements and debossed knurled pattern for better grip in all conditions / Includes: 2x tape rolls, lever strips, bar end-plugs, and finishing strips - Thickness: 2.7mm, length: 200cm, weight: 82g

- Replacement bolt for DUB cranks

Shimano Altus BR-CT91 cantilever brakes offer confident and reliable braking at a convenient price point. - Brake Lever Actuation: Short Pull - Brake Mount Type: Canti Studs - Material: Aluminum - Pad Attachment Style: Threaded Post - Weight: 204g

Shimano B05S Disc Brake Pads - Includes 3 types of split pins - Provides 50% more wear resistance than previous model (B03S) - Compatible with Shimano models: BR-MT500, BR-MT400, BR-MT200, BR-MT375, BR-TX805, BR-UR300 - Stainless steel back plate

Shimano FD-M2000 front derailleurs feature Mega Lite and HyperGlide technologies for smooth and easy operation. They're a perfect replacement for your 3 x 9 drivetrain.

Replacement small parts for Hope disc brake Hope disc brake calipers.

- Bar end plugs are vital for any bike. - The new Wolf Tooth Alloy Bar End Plugs feature a machined 6061-T6 aluminum end cap, a bolt, and an expandable plastic nut to comprise a lightweight, secure bar end plug option. - Available in eight colors that match existing anodized Wolf Tooth headsets, seatpost clamps, chainring bolts, and more - It is compatible with drop bars and MTB bars.

In true DEITY fashion, the Crosshair Headset Cap exemplifies the style and detail you've come to expect from everything DEITY offers. We've included 3mm, 5mm, and 8mm spacers that are color-matched to create a clean refined option to finish off your cockpit. Not only are the cap and spacers machined from 6061 Aluminum, the bolt is CNC Machined from 7075 Aluminum to give you a precise and extremely durable centerpiece that is truly hassle-free. - Complete Aluminum 1 1/8" Headset Cap Kit - Features 7075 T6 Machined Aluminum Bolt - Includes 3mm, 5mm, and 8mm Spacers - Spacers Feature a Thin Profile For a Minimalist Style - Countersunk Bolt Design - Kit Includes the Star Nut - Weight: 13 grams (without star nut)

• High performance compounds recommended for all-conditions • Steel backing

To keep your Avid brakes functioning properly, check your pads for wear and replace them when necessary. Organic compound pads are softer for quieter braking and increased modulation, while metallic pads dissipate heat better and last a bit longer. Two pads, one retraction spring and a mounting bolt are included (enough for one brake) in each pad set. And, choose an aluminum backing plate if you're really counting the grams.

Bearings for maintaining and rebuilding DT Swiss hubs. - DT Swiss 6902 Bearing

DEITY Circuit Seatpost Clamp. Rounded edges, minimized size offer the perfect touch of refinement and style. - DEITY Circuit Seatpost Clamp - 36.4mm, Black

DEITY Circuit Seatpost Clamp. Rounded edges, minimized size offer the perfect touch of refinement and style. - DEITY Circuit Seatpost Clamp - 36.4mm, Bronze

DEITY Circuit Seatpost Clamp. Rounded edges, minimized size offer the perfect touch of refinement and style. - DEITY Circuit Seatpost Clamp - 36.4mm, Green

DEITY Circuit Seatpost Clamp. Rounded edges, minimized size offer the perfect touch of refinement and style. - DEITY Circuit Seatpost Clamp - 36.4mm, Orange

DEITY Circuit Seatpost Clamp. Rounded edges, minimized size offer the perfect touch of refinement and style. - DEITY Curcuit Seatpost Clamp - 36.4mm, Silver

COMPATIBLE WITH THE FOLLOWING ONEUP GUIDES - CHAIN GUIDE - ISCG05 - V2 - BASH GUIDE - ISCG05 - V2 - E-BIKE - STEPS/EP8 - Kit includes 1 two piece top guide

This kit includes all the parts required to rebuild your V2 Dropper Post. - Replacement Seal - Upper and lower bushings - Anti-rotation pins - Compatible with V2 Dropper Post ONLY.

The newly redesigned Eagle AXS Rocker Paddle gives the rider a traditional, familiar interface for their cutting-edge electronic control. Effortless electronic shifting paired with a more traditional-feeling actuation makes for quick assimilation of riders who are new to AXS and provides another ergonomic option for those who have run AXS previously. The controller's functions are customizable through the AXS app, allowing you to assign any action to any button. With AXS, you can truly make your cockpit your own. - Customize in-board and outboard shift options - AXS-enabled components can be programmed and personalized using the SRAM AXS App.

SRAM's PC-1 Single Speed Nickel Chain is designed for singlespeed bicycles so it won't jump off when you're laying down the power. It comes with a connector link for easy installation and removal.

- X-SYNC 2 chainring design increases chain retention, wear life, and reduces friction and noise. - Designed to be used with Eagle chain - Chainring bolts not included

- Simple and reliable square taper bottom bracket - Replaces both BB-UN26 and BB-UN55 - Sealed cartridge bearings - Cr-Mo axle - For bicycles equipped with a chain case, select BB-UN300-K - For E-type front derailleur compatibility, choose BB-UN300-E - Fixing bolts not included; Shimano FC-E6000 bolts suggested

- HG technology has chamfered inner plates to optimise shifting performance on HG sprockets - Durability is assured through the heat treatment of rollers, pins, and plates - Includes connecting link - Weight: 335 grams

Shimano A01S Resin Disc Brake Pads - Fits XTR BR-M975/966/965, Saint BR-M800, XT BR-M776/775/765, SLX BR-M665/601, Deore BR-M596/595/585/545/535, Road BR-R505, Alfine BR-S501/500, LX BR-T665/605 calipers - OEM resin pad for XT BR-M775 and SLX BR-M665 calipers - Resin pad with low noise and excellent power modulation - Backing Plate Material: Steel - Compound: Resin - Heat Sink: No - Pad Shape Number: 20

Shimano M03 Metal Disc Brake Pads - OEM pad for XT BR-M755 caliper - Sintered Metal pad with consistent, high stopping power in wet or dry conditions and excellent durability