Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes
  • Show More Model Years
  • Show Fewer Model Years

Parts

$61.99
absoluteBLACK Premium Oval 110 BCD Road Chainrings utilize absoluteBLACK's top-tier design features to greatly improve traction and speed. They are for use with all pre-2014 Shimano 5-bolt cranks, such as Dura-Ace FC7950, Ultegra FC6750, Shimano 105 5750, and more. Optimized with smooth shifting in mind, premium chainrings have a 6-point ramp and recess design. Chainrings are crafted from CNC machined 7075 aluminum and feature an anodized finish for exceptional durability. - Oval shape reduces stress on knees, helps to keep your legs fresh, and does not feel any different while riding - Chainring design reduces the possibility of leg cramps and allows you to maintain a better cadence while climbing - Use with absoluteBLACK long chainring bolts - If only switching the inner chainring to oval, use all original crank bolts - 6.5% ovality is ideal for road climbing
$61.99
absoluteBLACK Round 104/64 BCD Chainrings are designed for use with all cranksets with a 104/64 BCD interface, including Shimano, SRAM, Race Face, FSA, and more. These chainrings allow you to run a 1x system without chain retention issues. The specially designed narrow-wide tooth profile keeps the chain snug, allowing you to leave your chain keeper in the garage. They are crafted from CNC machined 7075 aluminum and feature an anodized finish for exceptional durability. - The unique, patent-pending narrow-wide tooth profile keeps the chain in place - The chainring's offset helps to create an ideal chainline - Provides exceptional reliability, weight savings, and stiffness - 9, 10, 11, and 12-speed Eagle compatible - Use with absoluteBLACK short chainring bolts
$80.00
absoluteBLACK Oval 96 BCD 1x Chainrings greatly improve traction and climbing abilities. They are designed for use with Shimano XT M8000, SLX M7000, and MT700 1x or 2x cranks only. The specially designed narrow-wide tooth profile keeps the chain snug, allowing you to leave your chain keeper in the garage. They are crafted from CNC machined 7075 aluminum and feature an anodized finish for exceptional durability. Ovality has been optimized for each chainring size, ranging from 10.2-14.4%, with timing of 110.5-116.3° after TDC (top dead center). - Only compatible with Shimano XT M8000, SLX M7000, and MT700 1x or 2x cranks - Chainrings fit boost and non-boost bikes, as correct offset is realized by the crank spider itself, not chainring - Oval shape reduces stress on knees, helps to keep your legs fresh, and does not feel any different while riding - Teeth have been 3D-machined for ultimate mud shedding and quieter operation - The unique, patent-pending narrow-wide tooth profile keeps the chain in place - Chainrings have built-in standoffs to provide the ideal 1X chainline - For 49mm chainline - Only use the included extra-long chainring bolts
$129.99
absoluteBLACK Premium Oval 110 BCD Road Chainrings utilize absoluteBLACK's top-tier design features to greatly improve traction and speed. They are designed specifically for SRAM cranks that have 1 hidden chainring bolt behind the crank arm, such as RED, RED eTap, RED 22, Force 1, Force 22, Rival, Rival 1, and more. Optimized with smooth shifting in mind, premium chainrings have a 6-point ramp and recess design. Chainrings are crafted from CNC machined 7075 aluminum and feature an anodized finish for exceptional durability. - Oval shape reduces stress on knees, helps to keep your legs fresh, and does not feel any different while riding - Chainring design reduces the possibility of leg cramps and allows you to maintain a better cadence while climbing - Outer rings feature 6-point shifting ramps that work in conjunction with the tooth recesses to stabilize the chain while shifting and allow for easy and quick gear changes - Outer chainrings also feature 12 down-shifting point - 10.3% ovality is ideal for road climbing
$249.00
absoluteBLACK SpideRing Oval 2x Direct Mount Chainring Sets for Cannondale are incredibly stiff and lightweight. Sold as a set, they are designed for Cannondale Hollowgram cranks, such as SI, SISL, and SISL2. Chainrings have a ramp and recess design to improve shifting performance. Ovality has been optimized for road climbing with timing of 108 -110.5° after TDC (top dead center). - Sold as a 2x chainring set - Oval shape reduces stress on knees, helps to keep your legs fresh, and does not feel any different while riding - Ramp and recess shifting design makes shifting smooth and fast - Small chainring is replaceable - Provides excellent weight-to-strength ratio
$69.99
Wolf Tooth ReMote Light Action has a longer lever arm than the standard ReMote and is optimal for dropper posts with a harder pull or for riders that just prefer a really light actuation feel. It reduces the force to actuate a dropper by nearly a third of the standard ReMote. Based on rider feedback and tailored to work with some posts' stiffer internal springs, the ReMote Light Action is also the choice of those with thumb injuries or reduced hand strength. - Upfront cable fixing - Large diameter ball bearing - Cable-kind clamp - Low-profile, light action - Integrated cable adjust - Breakaway axle pivot - High-traction lever - Broad compatibility
$75.00
Wolf Tooth ReMote Light Action has a longer lever arm than the standard ReMote and is optimal for dropper posts with a harder pull or for riders that just prefer a really light actuation feel. It reduces the force to actuate a dropper by nearly a third of the standard ReMote. Based on rider feedback and tailored to work with some posts' stiffer internal springs, the ReMote Light Action is also the choice of those with thumb injuries or reduced hand strength. - Upfront cable fixing - Large diameter ball bearing - Cable-kind clamp - Low-profile, light action - Integrated cable adjust - Breakaway axle pivot - High-traction lever - Broad compatibility
Wheels Manufacturing hangers are stiffer than almost any OEM hanger, which improves durability and shifting performance. - OEM hangers are only produced by a handful of manufacturers, mostly in Taiwan and China. As a result, you will see many bikes with exactly the same hanger. Bicycle manufacturers may make mid year changes. Please use the hanger photos to select the proper hanger for your application. - CNC machined 6061 aluminum - Black anodized finish - Made in the USA
$27.00
Wheels Manufacturing hangers are stiffer than almost any OEM hanger, which improves durability and shifting performance. - OEM hangers are only produced by a handful of manufacturers, mostly in Taiwan and China. As a result, you will see many bikes with exactly the same hanger. Bicycle manufacturers may make mid year changes. Please use the hanger photos to select the proper hanger for your application. - These hangers DO NOT INCLUDE attachment hardware with the exception of QBP # FS1561 (DROPOUT 399) - CNC machined 6061 aluminum - Made in the USA
$28.00
- Precision-machined brass shift cable ferrules for improved braking and shifting performance - A flat bottom on the inside prevents housing from pulling through ferrules. - 4mm ID for use with most shifting cables - 50-count bottle
$40.00
Wheels Manufacturing hangers are stiffer than almost any OEM hanger, which improves durability and shifting performance. - OEM hangers are only produced by a handful of manufacturers, mostly in Taiwan and China. As a result, you will see many bikes with exactly the same hanger. Bicycle manufacturers may make mid year changes. Please use the hanger photos to select the proper hanger for your application. - These hangers DO NOT INCLUDE attachment hardware with the exception of QBP # FS1561 (DROPOUT 399) - CNC machined 6061 aluminum - Made in the USA
$40.00
Wheels Manufacturing hangers are stiffer than almost any OEM hanger, which improves durability and shifting performance. - OEM hangers are only produced by a handful of manufacturers, mostly in Taiwan and China. As a result, you will see many bikes with exactly the same hanger. Bicycle manufacturers may make mid year changes. Please use the hanger photos to select the proper hanger for your application. - These hangers DO NOT INCLUDE attachment hardware with the exception of QBP # FS1561 (DROPOUT 399) - CNC machined 6061 aluminum - Made in the USA
$40.00
Wheels Manufacturing hangers are stiffer than almost any OEM hanger, which improves durability and shifting performance. - OEM hangers are only produced by a handful of manufacturers, mostly in Taiwan and China. As a result, you will see many bikes with exactly the same hanger. Bicycle manufacturers may make mid year changes. Please use the hanger photos to select the proper hanger for your application. - These hangers DO NOT INCLUDE attachment hardware with the exception of QBP # FS1561 (DROPOUT 399) - CNC machined 6061 aluminum - Made in the USA
$48.00
Wheels Manufacturing hangers are stiffer than almost any OEM hanger, which improves durability and shifting performance. - OEM hangers are only produced by a handful of manufacturers, mostly in Taiwan and China. As a result, you will see many bikes with exactly the same hanger. Bicycle manufacturers may make mid year changes. Please use the hanger photos to select the proper hanger for your application. - These hangers DO NOT INCLUDE attachment hardware with the exception of QBP # FS1561 (DROPOUT 399) - CNC machined 6061 aluminum - Made in the USA
$55.17
Replacement Enduro 6806/29 ABEC-3 sealed bearings for Wheels Mfg DUB Compatible bottom brackets. - Dimensions: OD: 42mm / ID: 29mm / Width: 7mm - ABEC-3 - Grade 10, 5/32" chromium steel balls - Kyodo Yushi SRL grease or equivalent - Imported - Sold as Bag of 2
$90.00
The Wheels Mfg original PF30 bottom bracket is a significant upgrade to any OEM PF30 bottom bracket. Two machined aluminum cups offer increased durability and bearing life, while keeping a simple press together method for installation and maintenance. This means no more creaking, smoother operation, longer bearing life, and really quick bearing replacement. - Bearings: Enduro Angular Contact - Color: Black - Bottom Bracket/Frame Interface: PF30, BB386EVO, Specialized Carbon OSBB, BBRight" Press Fit - Bottom Bracket Shell Width (mm): 61mm to 86.5mm - Bottom Bracket Shell I.D.: 46mm - Crank Spindle Type: BB30 - Crank Spindle Diameter: 30mm - Weight: 112g
$118.65
The Wheels Mfg PF30 Outboard bottom bracket will give you all of the same benefits as their well-loved Outboard style BBs. The two machined aluminum cups thread together ensuring the bottom bracket remains stable in the frame, increasing bearing life, and simplifying maintenance. This means no more creaking, smoother operation, longer bearing life, and really quick bearing replacement. Specifically designed for installing 24mm spindle diameter cranks (Shimano, FSA, Etc.) in PF30 frames without the need for adapters. - Bearings: Enduro ABEC-3 - Color: Red - Bottom Bracket/Frame Interface: PF30, Specialized Carbon OSBB - Bottom Bracket Shell Width (mm): 68mm - 73mm - Bottom Bracket Shell I.D.: 46mm - Crank Spindle Type: Shimano Hollowtech II, FSA MegaExo, RaceFace EXI - Crank Spindle Diameter: 24mm - Weight: 161g
$123.99
T47 threaded BB cups for T47 frames and 30mm diameter spindle cranks. Cups have internal bearings, and can be used in BB shells with widths from 68mm to 132mm. Machined aluminum cups thread together directly into a T47 BB shell. Bearings are easily serviced or replaced. Includes sleeve to fit between cups for added protection from dirt and grime, and also keeps your internal wires and hoses from rubbing on the crank spindle. T47 BB cups are similar to standard BSA threaded cups in that the drive side cup is left-hand thread and the non-drive side cup is right-hand thread. Use a quality grease when installing in steel or aluminum BB shells, and an anti-seize compound compatible with titanium BB shells. Bottom Bracket Includes: - BB Cups with bearings - 2x Silicone dust seals - 2x 0.5mm crank spindle spacers - 2x 1.0mm crank spindle spacers Specifications: - Bearings: Enduro ABEC-3 - Bottom Bracket/Frame Interface: T47 - Bottom Bracket Shell Width (mm): 68mm - 132mm - Bottom Bracket Shell I.D.: 47x1.0mm Threaded - Crank Spindle Diameter: 30mm - Over Bearing Width: 68mm in 68mm wide shell - Over Bearing Width Dimensions include supplied silicone dust shields - Tool Pattern: 48.5mm x 16-notch - Weight: 97g
$141.95
T47 threaded BB cups for running 30mm spindle cranks in T47 frames. Cups have internal bearings and are typically used in BB shells with widths wider than 73mm. Machined aluminum cups thread together directly into a T47 BB shell. Bearings are easily serviced or replaced. Includes sleeve to fit between cups for added protection from dirt and grime, and also keeps your internal wires and hoses from rubbing on the crank spindle. T47 BB cups are similar to standard BSA threaded cups in that the drive side cup is left-hand thread and the non-drive side cup is right-hand thread. Use a quality grease when installing in steel or aluminum BB shells, or a titanium-compatible anti-seize compound in titanium BB shells. - Bearings: Enduro Angular Contact - Bottom Bracket/Frame Interface: T47 - Bottom Bracket Shell Width: 68mm – 132mm - Bottom Bracket Shell I.D.: 47x1.0mm Threaded - Over Bearing Width: 91.7mm in 86.5mm wide shell (dimensions include supplied silicone dust shields) - Tool Pattern: 48.5mm x 16-notch
$144.25
Specifically designed for installing 24.00mm spindle diameter cranks (Shimano, etc.) in Cannondale PF30A (46mm ID, 73mm wide asymmetrical BB shell) frames without the need for any adapters. The two machined aluminum cups thread together ensuring the bottom bracket remains stable in the frame, increasing bearing life, and simplifying maintenance. This means smooth operation, fast bearing replacement, and no more creaking. - Bearings: ABEC-3 - Color: Black - Bottom Bracket/Frame Interface: Cannondale PF30A - Bottom Bracket Shell Width: 73mm - Bottom Bracket Shell I.D.: 46mm - Over Bearing Width: 91mm in 73mm wide shell (dimensions include supplied silicone dust shields) - Tool Pattern: 44mm x 16 notch Note: FSA MegaExo spindles can be between 24.00mm and 24.07mm in diameter. If your FSA spindle is 24.07mm, this BB will not work! Please purchase Wheels Mfg. FSA 24.07x37 ceramic hybrid bearings separately.
$144.53
The Wheels Mfg BB30 Outboard bottom bracket will give you all of the same benefits as their other Outboard style BBs. The two machined aluminum cups thread together ensuring the bottom bracket remains stable in the frame, increasing bearing life, and simplifying maintenance. This means no more creaking, smoother operation, longer bearing life, and really quick bearing replacement. Specifically designed for installing 24mm spindle diameter cranks (Shimano, FSA, Etc.) in BB30 frames without the need for adapters. - Bearings: Enduro Angular Contact - Color: Red - Bottom Bracket/Frame Interface: BB30, Specialized Alloy OSBB - Bottom Bracket Shell Width (mm): 68mm - 73mm - Bottom Bracket Shell I.D.: 42mm - Crank Spindle Type: Shimano Hollowtech II, FSA MegaExo, RaceFace EXI - Crank Spindle Diameter: 24mm - Weight: 127g
$229.99
Built to take on anything, the Speedplay Zero road pedal is uniquely qualified to withstand the demands of everything from all-out racing to the epic grind of a double-century. The stainless steel pedal and integrated cleat system offer peak power transfer and exceptional durability, while the customized fit and dual-sided entry will allow you to crank on the pedals in confidence and comfort. Speedplay is the only pedal system to provide independent fore-aft, left-right, and float adjustability to optimize fit and enhance performance through better biomechanics. Designed specifically to maximize every performance advantage the Speedplay platform offers, Zero is a lightweight race-ready, multipurpose pedal that’s durable enough to go the distance ride after ride. - Weight: 220g (per pedal pair) - Spindle Material: Stainless Steel - Spindle Length: 53mm - Float: Fixed-15º Micro-Adjustable - Cornering Angle: 37º - Bearing: Sealed
$279.99
Whether gunning for the podium or just wanting to finish strong, the Speedplay Aero road pedal is aerodynamically engineered to defy wind and boost speed with less effort. The unique 3-axis adjustability allows you to dial in your cleat positioning, micro-adjust your float up to 15 degrees, and decrease your stack height for the most aerodynamic fit on your bike. Speedplay is the only pedal system to provide independent fore-aft, left-right, and float adjustability to optimize fit and enhance performance through better biomechanics. By integrating Speedplay's advanced pedal platform into Aero's streamlined design, a pedal profile is created that minimizes drag, helping you achieve faster finishes and shattered PRs. - Weight: 224g (per pedal pair) - Spindle Material: Stainless Steel - Spindle Length: 53mm - Float: Fixed-15º Micro-Adjustable - Cornering Angle: 39º - Bearing: Sealed
$48.00
Striking the balance between light weight, long life and durability, TruVativ's Giga Pipe Team SL Bottom Bracket uses 3 sealed cartridge bearings to provide smooth pedaling season after season. For serious strength, the Giga Pipe boasts CNC-machined aluminum cups and a stiff chromoly spindle, too.
$70.00
Downhillers and freeriders need tough gear that can handle the abuse of big air and huge drops. TruVativ's Giga Pipe Team DH Bottom Bracket uses four sealed cartridge bearings to provide smooth pedaling season after season. For serious strength, the Giga Pipe boasts CNC-machined aluminum cups and a stiff chromoly spindle, too.
TRP’s two-piece rotors offer superior heat dissipation due to the aluminum center as well as excellent stiffness to provide you with confidence in your braking and lighter weight in 180/203mm sizes. Two-piece is now combined with TRP’s new slotted rotor is design. Six recessed slots create channels to allow water, mud, and other debris trapped between the pad and rotor to escape under braking. When debris gets trapped between the pad and rotor braking power is dramatically reduced, these recessed slots maintain a more consistent brake feeling in mixed conditions. - Sizes: 140mm, 160mm, 180mm, and 203mm - Six slots to remove water, mud, and debris - Two-piece design for heat management and stiffness
$4.50
Can be used to provide extra clearance between brake caliper and spokes. Spacer should be placed between rotor and hub.
$16.00
Lock rings for all TRP Centerlock Rotors
$20.00
Adapters to convert your flat mount fork to post mount calipers - FF-1 front 140mm rotor - FF-2 front 160mm rotor - FR-1 rear 140mm rotor - FR-2 rear 160mm rotor - Each includes two bolts
$20.00
Adapters to convert your rear flat mount frame to post mount caliper - FR1-R140 = rear 140mm rotor - FR2-R160 = rear 160mm rotor - Each includes two 32mm bolts
$45.99
TRP’s new slotted rotor is designed for the most demanding riders in the most demanding conditions. Six recessed slots create channels to allow water, mud, and other debris trapped between the pad and rotor to escape during braking. When debris gets trapped between the pad and rotor braking power is dramatically reduced, these recessed slots maintain a more consistent brake feeling in mixed conditions. Upgrade the stopping power and heat dissipation by increasing the size of your rotor giving you more surface area and leverage. - Sizes: 140mm, 160mm, 180mm, and 203mm - Six slots to remove water, mud, and debris - Single piece design for weight savings - Weight: 117g (160mm)
$69.99
TRP's two-piece rotors offer superior heat dissipation due to the aluminum center as well as excellent stiffness to provide you with confidence in your braking and lighter weight in 180/203mm sizes. Its two-piece design is now combined with TRP's new slotted rotor design with a 2.3mm thickness for DHR and E-MTB only. When debris gets trapped between the pad and rotor, braking power is dramatically reduced. This rotor's six recessed slots create channels to allow water, mud, and other debris trapped between the pad and rotor to escape under braking for more consistent braking power and modulation in mixed conditions. - Six slots to remove water, mud, and debris - Two-piece design for heat management and stiffness
$45.69
Maximum pad life. Minimum brake fade. EXOTherm2 combines an extremely durable, smooth modulating pad compound with a cooling fin equipped back plate which provides consistent, powerful braking in all conditions. - pad wear rate is much lower than competitors - smooth, consistent brake performance - lightweight at 22 grams per pair (Disc 28 EXOTherm2) Fits: Formula: - RO Racing - T1 Racing - R1 Racing - R1 - C1 - CR3 - T1 - RO - Mega - The One - RX - RR1 - CURA
$35.00
Machined from heat-treated, chrome-plated chromoly, these seriously tough cogs will hold up to massive track sprints and crazy skid-stops. Surly's Track Cogs are strong, shiny and they come in two widths and sizes from 13T to 22T so you can select the perfect gear.
$40.00
Super Sticky Kush is the bar tape of choice for 3x World Champion Peter Sagan. Fusing performance and style, Supacaz delivers the only bar tape worth dreaming about. We boldly claim that Super Sticky Kush is the best bar tape ever. Galaxy series adds just enough color to mix or match with any bike. - Super Sticky PU (top layer): Superior supple hand feel with long-lasting performance. Extremely advanced polyurethane that remains tacky in wet conditions. Highly resistant to UV rays, climate, and sweat. - Kush Foam (middle layer): Exclusive compound that maximizes dampening via a nano amount of foam. Shock absorbing qualities that drastically improve bike handling in the corners, downhill, and in rough conditions. - Emboss: The tape is completed with the embossment of the beloved Supacaz pattern. The embossment creates the unique Supacaz look and wicks away moisture which maxamizes grip. - Tackiest/Best Hand Feel - Long-lasting PU tape - TruNeon: Super Bright, Exclusive Colors 1 Set includes: - Two Super Sticky Kush tape rolls - Two aluminum laser-etched Star Plugz (powder coated or anodized) - Two high-end rubberized finish tapes
$40.00
Super Sticky Kush is the bar tape of choice for 3x World Champion Peter Sagan. Fusing performance and style, Supacaz delivers the only bar tape worth dreaming about. We boldly claim that Super Sticky Kush is the best bar tape ever. StarFade will transform any bike into a head-turner with a blast of color and flashy graphics. - Super Sticky PU (top layer): Superior supple hand feel with long lasting performance. Extremely advanced polyurethane that remains tacky in wet conditions. Highly resistant to UV rays, climate, and sweat. - Kush Foam (middle layer): Exclusive compound that maximizes dampening via a nano amount of foam. Shock absorbing qualities that drastically improve bike handling in the corners, downhill, and in rough conditions. - Emboss: The tape is completed with the embossment of the beloved Supacaz pattern. The embossment creates the unique Supacaz look and wicks away moisture which maximizes grip. - Tackiest/best hand feel - Long-lasting PU tape 1 Set includes: - Two Super Sticky Kush tape rolls - Two aluminum laser-etched Star Plugz (powder coated or anodized) - Two high-end rubberized finish tapes
$45.00
Bar tape that’s straight from another dimension. The Prizmatik series utilizes exclusive materials to produce a super flashy, cleanable, and extremely durable bar tape like never seen before. Prizmatik tapes are a full 10 out of 10 when it comes to style. If you are looking to stand out, this is the bar tape for you. - Long Lasting PU Tape - Easy to Clean - Laser Etched Aluminum Bar Plugs - High-End Rubberized Finishing Tape
$539.99
The new Gen 3 single-sided Stages Power L meter is built on to a non-drive-side FSA SL-K BB30 crank arm. Tour Proven. Stages Power has carried riders to three consecutive Tour de France victories, plus many more world and national championships. If you believe racing provides the world’s best product proving ground, then Stages Power is proven as the world’s best power meter. Active Temperature Compensation as standard equipment. Consistency of measurement is the most important feature of a power meter. Stages Power was the first meter to make temperature compensation an automatic process ensuring accurate readings no matter the environmental conditions. Individual meter calibration for the most accurate results. Stages Power meters are calibrated individually to ensure a +/- 1.5% accuracy level. Individual calibration means that you can trust the data produced by our system. Additional features: - ± 1.5 % accuracy in all conditions - Active temperature compensation - Accelerometer based cadence measurement - Wirelessly upgradable firmware - LED indicator displays battery level at start up (with no need for connect to an app) and confirms successful zero reset - Updated accelerometer and addition of gyroscope for improved cadence resolution - Upgraded BLE and ANT+ radios offer a 6X improvement of data transmission strength Specifications - Power meter housing: low profile design, with robust door interface - Weight: Only adds 15g to base crank arm - Battery Life: 200+ hours (coin cell: CR2032) when used as a single sided meter - Power range (Watts): 0 to 5000 - Cadence range (rpm): 10-220 - Water resistance rating: IPX7 In the box - Power Meter - High quality CR2032 coin cell battery - Lifetime access to Stages Link for power meter management and firmware upgrades. - 2 months free access to Stages Link premium training and coaching features. - Product Identification Card with Serial Number and ANT+ I.D. Number. - User Guide
$15.00
NASTRO AERO is a 1mm-thick die-cut SILCAthane tape for aero bars and extensions that provides improved comfort and ultimate grip in wet and dry conditions. Inspired by advancements in running shoe foam and F1 tires as well as our own research into rolling efficiency, impedance, and damping, we realized that new materials technology could allow for a significant improvement in bar tape. Using a laminate of SILCAthane, the tape can be optimized across a range of desired features. The resulting tape has a softer, more comfortable feel, higher wet and dry grip, better vibration isolation, and 3-5x the durability of existing tape materials. - 1mm thick grippers with high-performance 3M adhesive backing - Improves grip and comfort - Specifically designed for complex handlebars and aero extensions - Optimized for ultimate wet/dry grip while adding minimal frontal area
$50.00
The most advanced foam ever used in bar tape along with an extremely long wearing and tacky top layer, this is the ultimate in comfort. - 2.5mm of cushion similar dampening to 3.5mm in other tapes. - Laser engraved aluminum end plug. - Fully adhesive finishing tape. - Butterfly clamp cover that doesn't add bulk. - SILCA Crash Replacement Program
$50.00
Nastro Cuscino is a Tri-Laminate 3.75mm-thick tape that provides cushioning and comfort equivalent to 5mm of traditional bar tape foam. CUSCINO has a strong texture, medium-high tackiness, and printed silicone graphics which adds comfort and grip in both wet and dusty conditions. Inspired by advancements in running shoe foam and F1 tires as well as our own research into rolling efficiency, impedance, and damping, we realized that new materials technology could allow for a significant improvement in bar tape. Using a laminate of SILCAthane, SILCAlon, and 3M Visco-elastic adhesive instead of a single-foam extrusion, the tape can be optimized across a range of desired features. The resulting tape has a softer, more comfortable feel, higher wet and dry grip, better vibration isolation, and 3-5x the durability of existing tape materials. Since the actual wrap of the tape can be as important as the tape itself, we've also developed a full adhesive-backed 'butterfly' to better cover the back of the lever clamp area without adding bulk, a high-grip finishing tape, and expanding aluminum/composite end plugs to ensure every detail is perfect. - Ultra Performance 3.75mm-thick Tri-Laminate design delivers equivalent cushioning to 5.0mm tapes of traditional materials - SILCAlon (2-Hour Marathon Shoe foam) offers greater cushioning and 3-5x more rebound for improved performance over rough surfaces - Debossed racing stripe pattern plus embossed color silicone printing for improved grip and cushioning - Laser-engraved aluminum expanding bar-end plug - TPU finishing tape with full 3M adhesive - Butterfly-shaped brake clamp cover
$6.00
- Shimano, Y8JA98020, SM-BH90, Olive and connecting insert
$12.00
Shimano Replacement pads for Mountain brake shoes - Shimano Cartridge-type mountain brake pads fit models: XTR BR-M970, BR-M960, BR-M951, BR-M950 XT BR-T780, BR-M770, BR-M760, BR-M750, BR-M739, BR-M737 LX BR-T670, BR-M580, BR-M570 Deore BR-M530, BR-M510 Alivio BR-M430, BR-MC18 Acera BR-M422, BR-M421, BR-M420, BR-M330, BR-T300 DXR BR-MX70 MX BR-M600 - M70CT4: Only for sidewall-machined rims; performs especially well in wet conditions and may pass DIN standard; tends to be low noise, low rim wear and fade - Color: Black - Intended Brake Type: Linear Pull - Pad Attachment Style: Threaded Post - Pad Type: Replacement Insert - Cartridge - Rim Compatibility: Standard
$12.00
Shimano Replacement pads for Mountain brake shoes - Color: Black - Intended Brake Type: Linear Pull - Pad Attachment Style: Threaded Post - Pad Type: Replacement Insert - Cartridge - Rim Compatibility: Standard - Shimano Cartridge-type mountain brake pads fit models: XTR BR-M970, BR-M960, BR-M951, BR-M950 XT BR-T780, BR-M770, BR-M760, BR-M750, BR-M739, BR-M737 LX BR-T670, BR-M580, BR-M570 Deore BR-M530, BR-M510 Alivio BR-M430, BR-MC18 Acera BR-M422, BR-M421, BR-M420, BR-M330, BR-T300 DXR BR-MX70 MX BR-M600 - M70R2: Severe condition brake pad, high performance in dry or wet conditions
$12.00
Shimano Replacement pads for Road brake shoes - Color: Black - Intended Brake Type: Caliper - Pad Attachment Style: Bolt-In (Caliper) - Pad Type: Replacement Insert - Cartridge - Rim Compatibility: Standard - Shimano Cartridge-type road brake pads fit models: Dura-Ace BR-9000, BR-9010, BR-7900, BR-7800, BR7700 Ultegra BR-6800, BR-6700, BR-6600, BR-6500 105 BR-5800, BR-5700, BR-5500 Non-Series BR-R600, BR-R561, BR-R560, BR-CX70s
$13.99
- Wears and functions like other links on the chain - SIL-TEC surface treatment - Tool free installation possible - TL-CN10 is available as SM-CN900-11 - Single use
$15.00
The Shimano Saint M800-2 Bash Guard protects your chainrings and ensures you can get even rowdier on the downhill course. - Use with CR1078: Saint FC-M800-2 Chainring bolt set - Shimano OEM bash guard for M800-2 crank sets - Material: Polycarbonate - Max chainring size: 32T
$17.00
If you put in a lot of miles and/or sweat a lot, your shifter hoods probably need freshening up. Grab a pair of Shimano Dura-Ace STI Lever Hoods to make your bike feel new again. - Fits Dura-Ace ST-R9100 levers
$18.00
Shimano Altus BR-CT91 cantilever brakes offer confident and reliable braking at a convenient price point. - Brake Lever Actuation: Short Pull - Brake Mount Type: Canti Studs - Material: Aluminum - Pad Attachment Style: Threaded Post - Weight: 204g
$20.00 - $25.00
- Simple and reliable square taper bottom bracket - Replaces both BB-UN26 and BB-UN55 - Sealed cartridge bearings - Cr-Mo axle - For bicycles equipped with a chain case, select BB-UN300-K - For E-type front derailleur compatibility, choose BB-UN300-E - Fixing bolts not included; Shimano FC-E6000 bolts suggested
$20.00
Shimano A01S Resin Disc Brake Pads - Fits XTR BR-M975/966/965, Saint BR-M800, XT BR-M776/775/765, SLX BR-M665/601, Deore BR-M596/595/585/545/535, Road BR-R505, Alfine BR-S501/500, LX BR-T665/605 calipers - OEM resin pad for XT BR-M775 and SLX BR-M665 calipers - Resin pad with low noise and excellent power modulation - Backing Plate Material: Steel - Compound: Resin - Heat Sink: No - Pad Shape Number: 20
$20.00
Shimano M03 Metal Disc Brake Pads - OEM pad for XT BR-M755 caliper - Sintered Metal pad with consistent, high stopping power in wet or dry conditions and excellent durability
$24.00
If you put in a lot of miles and/or sweat a lot, your shifter hoods probably need freshening up. Grab a pair of Shimano STI Lever Hoods to make your bike feel new again. - Fits Dura-Ace ST-R9120 levers
$24.00
Shimano's Tourney long cage rear derailleur incorporates advanced Shimano functions and styling that sets the standard for entry level components. - TY model comes with resin bracket and plate body for reduced weight - Zinc-plated adjustment screws for corrosion resistance - MegaRange compatible - Includes frame hanger - Maximum cog size: 34t - Total capacity: 43t
$25.00
Reliable and Durable 2-Bolt Cleat Small details make a big difference—especially when it comes to mountain biking. Worn-out cleats can lead to poor pedal function including premature or stubborn release. But swap on a new set of Shimano SM-SH51 Cleats and you know they're purpose-built to work seamlessly with nearly all Shimano SPD Pedals, delivering long-lasting performance thanks to their heat treated forged steel construction that will stand up to even the harshest riding conditions. Features: - Shimano SM-SH51 SPD Cleats come stock with all Shimano SPD pedals and are the go-to choice for mountain bikers, indoor cyclists, and anyone looking for a durable and reliable 2-bolt cleat. - Customizable: Engineered specifically to work with nearly all Shimano SPD pedals, which allow you to micro-adjust the spring force required to clip in and out of your pedals - Secure Engagement: Deliver 4 degrees of float, which assures just the right amount of movement while also providing a secure connection to your bike - Ease of Disengagement: Feature a 13-degree clip-out angle, allowing you to quickly get out of your pedals when the need arises - Built to Last: Made from heat treated forged steel that delivers durable long-lasting performance even under the most severe riding conditions PREDICTABLE ENGAGEMENT With 4 degrees of float, Shimano SM-SH51 Cleats permit just the right amount of movement for critical on-the-fly weight shifts while still delivering the secure cleat-pedal engagement needed to confidently tackle technical terrain. USER FRIENDLY Shimano SM-SH51 Cleats are compatible with nearly all Shimano SPD pedals, which allow you to micro-adjust how hard or easy it is to clip in and out, providing an unmatched level of customization. These cleats also feature a 13-degree clip-out angle, meaning with the simple outward twist of your heel you can quickly get out of your pedals when the need arises.
$25.00
Enjoy quality and reliability with the Shimano Tourney 6/7-speed rear derailleur. It makes use of Shimano SIS, HyperGlide, and Double Servo technologies for smooth, accurate shifts. - Maximum cog size: 34t - Total capacity: 43t
$27.99
- Deore/Tiagra 9-speed compatible - 3/32-inch - 116 links
$30.00
Shimano's BB-UN55 Square Spindle Bottom Brackets are the unofficial standard for English-threaded cartridge bottom brackets. Quality, value, and durability come together to keep you cranking for many, many miles. - Fits JIS Square-Taper Cranksets - Hollow spindle - Crankarm fixing bolts not included
$30.99
Mountain bikers have used RAPIDFIRE PLUS since 1985. RAPIDFIRE PLUS is still a winning choice from a wide range of riders from XC racers to free-riders. RAPIDFIRE PLUS is suited to quick shifting, giving riders the ability to downshift three gears in one stroke. RAPIDFIRE PLUS shifters from Alivio to XTR all feature 2-Way Release, which means release shifts by a pull of the index finger or push of the thumb. - Highly visible Optical Gear Display (3mm up position) - Model Number: SL-M4000 - Series: Alivio - Shift Lever Type: Rapidfire Plus - Front Shifting: 3-speed - 2-way Release: Yes - Optical Gear Display: Yes - Shift Cable Casing: OT-SP40
$31.00
Shimano's SPD-SL cleats are perfect for all your SPD-SL-compatible pedals. Available in three models to suit your ergonomic needs, with fixed/0-degree, 2-degree, and 6-degree options. These cleats come as a pair and include all required mounting hardware. They are compatible with three-bolt cycling shoes. - 0° Float/fixed type = SM-SH10 - 2° Float/front center pivoting type = SM-SH12 - 6° Float = SM-SH11
Page 1 of 6 Next page