Parts

To keep your Avid brakes functioning properly, check your pads for wear and replace them when necessary. Organic compound pads are softer for quieter braking and increased modulation, while metallic pads dissipate heat better and last a bit longer. Two pads, one retraction spring and a mounting bolt are included (enough for one brake) in each pad set. And, choose an aluminum backing plate if you're really counting the grams.

Designed for use with T-Type chains, the Eagle Transmission PowerLock provides the same rugged dependability as its predecessors. - For use with T-Type chains - No tools required for installation

Wolf Tooth ReMote Light Action has a longer lever arm than the standard ReMote and is optimal for dropper posts with a harder pull or for riders that just prefer a really light actuation feel. It reduces the force to actuate a dropper by nearly a third of the standard ReMote. Based on rider feedback and tailored to work with some posts' stiffer internal springs, the ReMote Light Action is also the choice of those with thumb injuries or reduced hand strength. - Upfront cable fixing - Large diameter ball bearing - Cable-kind clamp - Low-profile, light action - Integrated cable adjust - Breakaway axle pivot - High-traction lever - Broad compatibility

T47 threaded BB cups for T47 frames and 30mm diameter spindle cranks. Cups have internal bearings, and can be used in BB shells with widths from 68mm to 132mm. Machined aluminum cups thread together directly into a T47 BB shell. Bearings are easily serviced or replaced. Includes sleeve to fit between cups for added protection from dirt and grime, and also keeps your internal wires and hoses from rubbing on the crank spindle. T47 BB cups are similar to standard BSA threaded cups in that the drive side cup is left-hand thread and the non-drive side cup is right-hand thread. Use a quality grease when installing in steel or aluminum BB shells, and an anti-seize compound compatible with titanium BB shells. Bottom Bracket Includes: - BB Cups with bearings - 2x Silicone dust seals - 2x 0.5mm crank spindle spacers - 2x 1.0mm crank spindle spacers Specifications: - Bearings: Enduro ABEC-3 - Bottom Bracket/Frame Interface: T47 - Bottom Bracket Shell Width (mm): 68mm - 132mm - Bottom Bracket Shell I.D.: 47x1.0mm Threaded - Crank Spindle Diameter: 30mm - Over Bearing Width: 68mm in 68mm wide shell - Over Bearing Width Dimensions include supplied silicone dust shields - Tool Pattern: 48.5mm x 16-notch - Weight: 97g

Jagwire's Shift Cable Tips are made of lightweight, corrosion-resistant and durable aluminum and are the right size to nicely fit over the ends of shift cables. These caps are crimped in place on the cables to prevent fraying and ensure your cables last a long time. The tips come in Gold and Silver so they also add a little style to your bike. - Each Bottle contains 500 tips

TMAC Signature Tyler McCaul Pedal. With over two years of development features one of the most concave designs on the market. Not only does the TMAC pedal give precise control, the non-offset design provides more contact with the pedal with equal weight distribution in front and back of the pedal spindle. This non-offset design feels like the largest pedal ever made at a mere 110mm x 105mm footprint.

The OneUp Dropper post is available in 120mm, 150mm, 180mm and 210mm lengths and all can be shimmed down in travel by 10 or 20mm. We've been obsessed with shaving every last millimeter from the latest OneUp post to give you the the shortest stack height and shortest total length of any dropper post. No other post can get your saddle lower. Starting from $199 USD with free shipping worldwide, cable actuated with reliable sealed cartridge internals for easy home servicing and includes travel adjust shims allow you to custom tune your post to dial in your perfect length. The dropper market is dominated by expensive big brand posts and generic catalog shopped posts with different logos. We want to offer something better, a post with class leading specs, innovative useful features AND real value. Want more from your dropper? Get OneUp. FEATURES - Travel adjust shims allow you to custom tune your post to dial in your perfect length. - Cable actuated for easy installation and a simple no bleed remote - Ergonomic remote paddle position - Reliable sealed cartridge internals - User replaceable cartridge only $60 USD - Easy to service at home - 2 year warranty UPDATES - Shortest total length of any dropper - Shortest stack height of any dropper - New upper DU Bushing in the upper collar - Increased bushing overlap and durability - 100-210mm post lengths in 10mm increments. - 20g lighter SPECS - Drop 120mm, 150mm, 180mm, 210mm adjustable*. - Diameter 30.9, 31.6, 34.9 - Routing Internal only Remote Compatibility: - SRAM Matchmaker X - SRAM MMX clamps - Shimano I-spec-EV - 12 speed XTR M9100, XT M8100 and SLX M7100 - Shimano I-spec II - 11 speed XTR M9000, XT M8000, SLX M8000 only - 22.2mm Bar Clamp - All other groups 10 speed SHIMANO - Cable clamping remote only (post requires cable stop to be assembled at base of post) - Travel Reducing Shim Reduces travel by up to 20mm. Weight Post Only - (30.9) 120mm 435g / 150mm 480g / 180mm 525g / 210mm 570g - (31.6) 120mm 450g / 150mm 500g / 180mm 545g / 210mm 590g - (34.9) 120mm 545g / 150mm 605g / 180mm 660g / 210mm 710g Remote Only - Remote with 22.2mm Bar Clamp - 46g - Remote with SRAM Matchmaker X / I-spec-EV - 43g - Remote with Shimano I-spec-EV - 43g - Remote with Shimano I-spec II - 41g - Housing and Cable (1300mm installed length) - 50g

Designed for use with Cannondale's Headshok (sold separately), the Headshok Stem is tough, light, and ready to ride. - Sleek styling with maximum strength and stiffness - Forged from a single block of lightweight 2024 aluminum with our patented OPI 3D forging process, these stems are exceptionally light and strong - 31.8mm clamp interface - Weight: 185 grams (100mm length)

System = speed. Paired with the SAVE or KN0T SystemStem, you get the speed and good looks of a one-piece system with the adjustability of a two-piece. Where it thrives: The open road, up and down hills What it's built for: Precision, control, comfort Highlights: - One-piece looks, two-piece function - Flatter top section, flared drops, and 6mm of deflection for a smooth ride - Integrated computer mount

The Best XC Suspension Fork in the World. The smoothest, most advanced, most precise-handling ultralight XC fork ever made. For pure XC performance, Lefty Ocho stands alone. Where it thrives: XC competition, fast & challenging trails What it's built for: Ultimate precision and control, lightweight efficiency Highlights: - Ultralight carbon upper leg/aluminum lower leg - High-flow Chamber Damper with self-balancing air spring - Remote lockout lever

Ride all over. The ultimate built-for-gravel suspension fork with 30mm of smooth, bump-taming suspension and an incredibly stuff, precise-handling structure. Where it thrives: Any road it goes on, challenging trails, up and down hills What it's built for: Precision, control, efficiency Highlights: - Spring progression tunable via Ramp Rings / All Over damper for pedaling stability / 30mm of travel - Air spring, rebound, and lockout (with blowoff), adjustments / fits: flat mount brakes and Lefty 50 hubs - 1 1/8"-1 5" tapered steerer / Max tire size: 700c (45mm), 650b (47mm) / weight: 1340g

Next level spin. Ultralight, durable SpideRing tech for the MTB world with a radial 10-arm design and an updated tooth profiles for chain retention. Where it thrives: Up and down hills, challenging trails What it's built for: Durability, efficiency Highlights: - 10-arm design for stiffness and durability / Compatible with all Hollowgram and Cannondale cranks - Tooth profile optimized for Shimano Hyperglide+ drivetrains / 55mm chainline - One-piece technology for strength and a super-light 67g (32t) weight

Next level spin. The forged one-piece design of the SL SpideRing is a handsome piece of engineering and one of the finest front shifting sets available. Where it thrives: The open road, up and down hills What it's built for: Durability, efficiency Highlights: - One-piece technology makes for reduced weight and increased stiffness and durability - X-Sync thick/thin tooth profiles for secure chain management - Eye-catching and unique design

Take a seat. Comfy makes happy, perfect for everyday with a quilted saddle top keeps things plush. Where it thrives: Leisurely rides, in town What it's built for: Comfort, durability Highlights: - Quilted saddle top for comfort and style - Steel rails for strength and durability 170mm width

Defy the norms. The hollow Si crankset, paired with the any SpideRing, is an impressive upgrade for any mountain or road bike. Where it thrives: Challenging trails, the open road, up and down hills What it's built for: Durability, efficiency Highlights: - Compatible with all SpideRings and HollowGram spindles - Self extracting bolts for easy removal - 172g/arm including hardware

The XC companion. Everything a full-carbon XC seatpost should be, light, strong and incredibly functional. Where it thrives: Up and down hills, challenging trails What it's built for: Stability, lightweight, compatibility Highlights: - Compatible with round, oval, and both metal and carbon rails - 190g, 31.6 diameter, 0 degree offset - Reflective rear decal

System = speed. Paired with the SAVE or KNØT SystemBar, you end up with the speed and good looks of a one-piece system with the adjustability of a two-piece. Where it thrives: The open road, up and down hills What it's built for: Aerodynamics, efficiency Highlights: - Integrated computer mount - Compatible with most bicycles - One-piece looks, Two-piece function

The workhorse. Whether your upgrading your stock parts or looking for something a bit more eye catching, the alloy ONE bar delivers. Where it thrives: The open road, up and down hills What it's built for: Stability, control, efficiency Highlights: - Lightweight aluminum construction - 76mm reach, 125mm drop - 31.8mm clamp size

Downhillers and freeriders need tough gear that can handle the abuse of big air and huge drops. TruVativ's Giga Pipe Team DH Bottom Bracket uses four sealed cartridge bearings to provide smooth pedaling season after season. For serious strength, the Giga Pipe boasts CNC-machined aluminum cups and a stiff chromoly spindle, too.

The DEFTRAP will revolutionize what you should expect from a nylon composite pedal with it's non-offset symmetrical platform to offer added stability behind the spindle, a true concave pedal profile so your feet sink into it, 10 total pins (8 replaceable cr-mo pins and 2 molded pins), our tried and true sealed bearings and DU bushing system, and top tier nylon and glass fiber composite material to create a pedal that feels unlike anything on the market. With a focus on ride quality, increased foot support, added stability, leading traction, ability to skim over rocks, and even coming in 10 colors-the DEFTRAP will challenge you to rebel against the conventional perception that a value pedal cannot rival the best pedals on the market!

Waste not, want KNØT. Part of the KNØT SystemBar, this aluminum stem helps save six watts over a traditional round handlebar. Not only that, you can adjust the bar position. Have cake. Eat cake. Where it thrives: The open road, up and down hills What it's built for: Aerodynamics, control Highlights: - One-piece looks, two-piece function - Wind tunnel proven, hides cables - Compatible with 2019+SuperSix EVO

More comfort, more control. Lightweight EVA foam and cork combine with a contemporary knurled texture twist – offering a stylish, comfortable, and durable finish to your bike. Where it thrives: The open road, gravel roads What it's built for: Grip, durability Highlights: - Comfortable, lightweight EVA foam absorbs road-buzz and feels great - Natural cork elements and debossed knurled pattern for better grip in all conditions / Includes: 2x tape rolls, lever strips, bar end-plugs, and finishing strips - Thickness: 2.7mm, length: 200cm, weight: 82g

We've redeveloped our TRC+ rubber compound to deliver 33% more grip and cushion without compromising the amazing durability you've come to expect from all DEITY Grips. Rounding out our grip line to offer something for everyone, the SUPRACUSH Grip delivers the most comfortable and deeply cushioned grip on the market. It's the perfect grip for riders of any hand size looking for increased vibration damping, a larger feeling grip, or a more supple ride. Not only does the SUPRACUSH give you an unmatched level of cushion with our TRC+ rubber compound, but the larger deep-dish diamond pattern offers the most comfortable grip possible without compromising control, precision, or durability. - 34mm outer diameter with plush cushioning throughout - Deep-dish DEITY diamond pattern compresses for comfort but also provides traction - Features soft DEITY TRC+ rubber compound for exceptional durability and increased grip - Tapered inner sleeve to insure perfect contact with the handlebar - Single clamp design with forward-facing bolts that feature Loctite - Lasered black ano 6061 T6 aluminum clamps - Seamless transition through the end of the grip for comfort - Capped end for safety and comfort - 133mm length with 34mm outer diameter - Intended use: All MTN / Enduro / DJ / Slopestyle / DH / and any other riding style of choice - 118 grams for the set

The SRAM DUB bottom bracket series has a simple job— to connect crankarms and protect the smooth, long-lasting application of power to the drivetrain. SRAM engineered the oversized DUB spindle to work across every bottom bracket standard, simplifying crankarm compatibility. - Gutter Seal Technology drastically improves sealing against the elements - Sealed cartridge bearings - One oversized spindle to work across every bottom bracket standard

Shimano Deore XT RT-MT800 Center Lock disc brake rotors feature an advanced heat-dissipating design. - Rotor construction uses Shimano Freeza technology to boost heat dissipation and reduce fade - Quick and easy installation with spline mount and lock ring (included) - Compatible with metal and resin pads

Super Sticky Kush is the bar tape of choice for 3x World Champion Peter Sagan. Fusing performance and style, Supacaz delivers the only bar tape worth dreaming about. We boldly claim that Super Sticky Kush is the best bar tape ever. StarFade will transform any bike into a head-turner with a blast of color and flashy graphics. - Super Sticky PU (top layer): Superior supple hand feel with long lasting performance. Extremely advanced polyurethane that remains tacky in wet conditions. Highly resistant to UV rays, climate, and sweat. - Kush Foam (middle layer): Exclusive compound that maximizes dampening via a nano amount of foam. Shock absorbing qualities that drastically improve bike handling in the corners, downhill, and in rough conditions. - Emboss: The tape is completed with the embossment of the beloved Supacaz pattern. The embossment creates the unique Supacaz look and wicks away moisture which maximizes grip. - Tackiest/best hand feel - Long-lasting PU tape 1 Set includes: - Two Super Sticky Kush tape rolls - Two aluminum laser-etched Star Plugz (powder coated or anodized) - Two high-end rubberized finish tapes

More comfort, more control. Advanced three-part construction is used to create a supple, durable tape with excellent vibration damping properties and a tacky all-weather finish. Where it thrives: The open road, up and down hills What it's built for: Comfort, control Highlights: - Lightweight EVA foam with a QuellGel silicone gel-layer provides an effective barrier against road-buzz for extra comfort - Thin polyurethane upper and knurled pattern provide grip in all weather / Includes: 2x tape rolls, lever strips, bar end-plugs, and finishing strips - Thickness: 3mm, length: 200cm, weight: 112g

TEMPO ARGO R3 is a versatile endurance road saddle with a short-nose design and generous ischial support that encourages stability. Where a traditional saddle shape encourages riders to shift their position frequently for better leverage, Argo puts the rider in a more planted position, making for greater stability and better weight distribution. Tempo Argo's short length allows the rider to sit further forward without placing undue pressure on sensitive tissues. It also features an ergonomic cutout that was developed using detailed pressure analysis and input from medical experts. Argo is our most versatile saddle shape and each version suits different riding styles. As the endurance riding option, Tempo Argo has been engineered to deliver a riding feel that suits the balanced geometry of today's all-purpose road machines. The padding is made from fizik's proprietary Type 2 foam formulation, slightly thicker around the ischial sit bones area to support a more upright riding posture. The cushioning is slightly softer and more progressive than the type we use on our racing saddles, providing more long-distance comfort. Argo is a product of the fizik Concepts program, a cross-disciplinary collaboration of leading industry experts and academics carrying out research and analysis on technology, design, physiology, and bike-fitting in search of ways to improve cycling performance. - Argo: a versatile short-nose saddle that encourages stability and relieves pressure on soft tissue area - R3: a combination of a ride-compliant carbon-reinforced nylon shell and a Kium hollow rail with a high strength-to-weight ratio - Wingflex: the shell's side edges flex and adapt to the rider's inner leg movement - Type 2 foam: progressive cushioning, with lower compression modulus SPECIFICATIONS: TEMPO ARGO R3 150 - Length: 260mm - Width: 150mm - Weight: 229g - Height at 75mm width: 43mm - Length from nose to 75mm width: 103mm - Rail: 7 x 7mm SPECIFICATIONS: TEMPO ARGO R3 160 - Length: 260mm - Width: 160mm - Weight: 235g - Height at 75mm width: 45mm - Length from nose to 75mm width: 103mm - Rail: 7 x 7mm

The Vento Argo R3 Adaptive is a versatile, short-nosed cycling saddle featuring the revolutionary zonal comfort of 3D-printed cushioning and the high strength-to-weight performance of the Kium hollow rail system. - Adaptive: Carbon Digital Light Synthesis 3D-printing technology, offering seamlessly engineered zonal cushioning - Argo: versatile short-nosed saddle that encourages stability and relieves pressure on soft tissue - R3: a combination of a ride-compliant, carbon-reinforced nylon shell and a Kium hollow rail with high strength-to-weight ratio

Hellbender bearings have an improved seal structure and are cross compatible with Cane Creek headsets.

The Shimano Deore XT RD-M8100/M8120 rear derailleur is designed to provide smooth and stable shifting for 12-speed MTB drivetrains. - Offers fast and shockless shifting - The low-profile design includes a bumper added to the derailleur pulley cage - Shimano Shadow RD+ technology reduces chain slap and creates a quieter drivetrain - Includes large, 13T pulley - Long cage is designed to be used with 1x12 drivetrain systems - Rear Derailleur Mount Type: Shimano Rear Direct Mount, 10x1 Standard - Drivetrain Speeds: 12 - Cage Length: Long - Chain Wrap Capacity (teeth): 41 teeth - Largest Cog: 51 - Weight: 284 g - Rear Der/Shifter Compatibility: Shimano Mountain

Next level spin. The forged one-piece design of the SpideRing is a handsome piece of engineering and one of the finest front shifting sets available. Where it thrives: The open road, up and down hills What it's built for: Durability, efficiency Highlights: - One-piece technology makes for reduced weight and increased stiffness and durability - Fully "ramped" for flawless shifting through detailed machining - Eye-catching and unique design

Shimano's SM-RT64 disc brake rotors deliver powerful and consistent braking performance in all riding conditions. SHimano's Center Lock mounting system makes installing and removing disc brake rotors quick and easy thanks to the spline mount and lock ring design. - Compatible with both resin and metal pads - Includes external type rotor lockring

When it’s time to update the flagship XTR pedals, we look at every detail under a microscope. Off-road racing demands speed, focus, and control. And that’s exactly what the PD-M9120 delivers. Increased drivetrain efficiency, an intuitive and seamless interface, and predictable steering and traction control are the benchmarks of the M9100 series pedals. The M9120 are the weapon of choice for WC racers worldwide. BETTER MUD CLEARANCE - Cylindrical contact area sheds mud even better for consistent stepping-in & out performance and rider confidence. ADDED EFFICIENCY + DURABILITY - Increased axle strength for long service life. M9100 comes in two axle lengths – 52 mm and 55 mm crank to pedal center. LARGER CONTACT AREA - The M9120 platform is designed for maximum shoe-to-pedal contact area without extra weight or rotating mass. Cage protects the binding and makes step in easy. BETTER MUD CLEARANCE - Wider edge-to-edge contact area provides solid shoe-to-pedal interface, transmits power more efficiently for faster and more consistent acceleration, and better bike control.

Shimano's SPD-SL cleats are perfect for all your SPD-SL-compatible pedals. Available in three models to suit your ergonomic needs, with fixed/0-degree, 2-degree, and 6-degree options. These cleats come as a pair and include all required mounting hardware. They are compatible with three-bolt cycling shoes. - 0° Float/fixed type = SM-SH10 - 2° Float/front center pivoting type = SM-SH12 - 6° Float = SM-SH11

Shimano A01S Resin Disc Brake Pads - Fits XTR BR-M975/966/965, Saint BR-M800, XT BR-M776/775/765, SLX BR-M665/601, Deore BR-M596/595/585/545/535, Road BR-R505, Alfine BR-S501/500, LX BR-T665/605 calipers - OEM resin pad for XT BR-M775 and SLX BR-M665 calipers - Resin pad with low noise and excellent power modulation - Backing Plate Material: Steel - Compound: Resin - Heat Sink: No - Pad Shape Number: 20

Aliante R3 K:ium: Aliante saddles are the widest and most longitudinally waved of fi’z:k’s trio of pro-cyclist-developed Spine Concept models. Aliante R3 K:ium is light, flexible and agile, enabling you to perform at your best. It features a composite fiberglass co-injected Nylon shell for support with optimized stiffness to-weight construction – with Twin Flex technology which combines a song, stiff carbon layer with a flexible, comfortable carbon layer – and an alloy K:ium rail for light weight and strength. - Shell: Composite glass co-injected Nylon TwinFlex - Rail: K:ium - Cover: Thermowelded Black Microtex - Rear Cover: Anthracite/Black Microtex - Scuff Guards: Black - Weight: 215 grams - Dimensions: 275x143mm - Integrated Clip System compatible - Spine Concept: Bull

Fi'zi:k's line of Vento tapes are race bred for ultimate control and reduced weight. Solocush is their most streamlined cushioned construction – a single-layer chunky platform to rest on during longer rides without compromises on weight. - Tacky finish adds a sticky nonslip surface with a raised texture for ultimate grip in every condition. - Solocush construction 2.7mm thick

If your plan is to install a 386EVO crank into a PF30A or BB30A Cannondale frame, look no further. This adapter from FSA is just what you need.

Designed to work seamlessly with Jagwire's Mountain Pro Hydraulic lines (sold separately), Jagwire's Mountain Pro Quick-Fit Adapters are the perfect way to enhance braking performance and simplify disc brake setup. Each adapter kit contains all the components required to connect both front and rear lines to the levers calipers. Compatibility - HFA207: Fits SRAM Guide R/RS/RSC/Ultimate and Avid Juicy 5/7/Carbon/Ultimate - HFA208: Fits SRAM DB5 Guide and Level and Avid Elixir, Trail, and XX - HFA209: Fits SRAM Guide and Level and Avid Code, DB, Elixir, and Juicy - HFA210: Fits SRAM Level TLM/Ultimate and 2018 Code R/RSC - HFA213: Fits SRAM RED eTap HRD and S900 Aero HRD

Beyond an incremental improvement. The Flattop technology of the SRAM Force chain creates a lighter, quieter, stronger chain. Ride far, long and fast—this chain can go the distance. - Flattop technology allows for a narrower chain with quieter operation and increased strength and durability - Hard Chrome plated inner and outer plates for faster and more precise shifts

absoluteBLACK Oval 96 BCD 1x Chainrings greatly improve traction and climbing abilities. They are designed for use with Shimano XT M8000, SLX M7000, and MT700 1x or 2x cranks only. The specially designed narrow-wide tooth profile keeps the chain snug, allowing you to leave your chain keeper in the garage. They are crafted from CNC machined 7075 aluminum and feature an anodized finish for exceptional durability. Ovality has been optimized for each chainring size, ranging from 10.2-14.4%, with timing of 110.5-116.3° after TDC (top dead center). - Only compatible with Shimano XT M8000, SLX M7000, and MT700 1x or 2x cranks - Chainrings fit boost and non-boost bikes, as correct offset is realized by the crank spider itself, not chainring - Oval shape reduces stress on knees, helps to keep your legs fresh, and does not feel any different while riding - Teeth have been 3D-machined for ultimate mud shedding and quieter operation - The unique, patent-pending narrow-wide tooth profile keeps the chain in place - Chainrings have built-in standoffs to provide the ideal 1X chainline - For 49mm chainline - Only use the included extra-long chainring bolts

- Half-link connector allows you to add or subtract half of one link (1/2 inch) from the chain in order to optimize chain tension - Uses standard chain pin connector and tool

Kool-Stop disc brake pads designed for use with Shimano disc brakes. - Features a copper plated backing plate and sintered pad compound for extreme conditions like down hill - Compatible with Shimano direct mount BR-RS505/805, Dura Ace BR-R9170, Ultegra BR-R8070/BR-R7070, GRX BR-RX810/BR-RX400, Metrea BR-U5000, XTR M9100, and Tiagra 4770

- Rider Tuned For Sharp And Silky Shifts - 20% Light Shifting Operation - New Shadow Design With Optimized Slant Angle - Optislick New Shift Cable With New Hyper Low-Friction Coating Technology - Chain Stability Improved - New Shadow Design With Optimized Slant Angle For Stable Gear Position - Efficient Shifting And Smoother Driving - Efficient Pulley Teeth Design - Increased Traction Range For Long-Travel And Active Rear Suspension - Series : SLX: SLX - Maximum Sprocket : 42T(2x11-speed) or 46T(1x11-speed) - Minimum Sprocket : 11T: 34-38T - Front Difference : 10T: 48.8 - Total Capacity : 41T: 66-69 - Average Weight : 323g: 145.6g

The workhorse of X-Range gearing, the SRAM RED XG-1290 cassette progresses fluidly and quickly through a wider range of gears. It's specifically designed for wireless electronic shifting and the one-piece design offers you the best in weight savings. - Updated design for smoother and faster shifting - More gradual gear progression between cogs—at least five one-tooth jumps—while still offering a wider range - 10-tooth start helps provide a wider gearing range - Designed to work with an XDR driver body - One-piece machined steel X-Dome design for weight savings - All Zipp wheels starting from 2012 are XDR ready - Version: D1 - 10-26T: 10, 11, 12, 13, 14, 15, 16, 17, 19, 21, 23, 26 - 10-28T: 10, 11, 12, 13, 14, 15, 16, 17, 19, 21, 24, 28 - 10-33T: 10, 11, 12, 13, 14, 15, 17, 19, 21, 24, 28, 33

The Hellbender 110 Bottom Bracket provides an incredible mix of performance and longevity through the inclusion of Enduro XD-15 ceramic bearings. These bearings feature nitrogen infused stainless steel races that will not rust or corrode paired with Silicon Nitride ceramic balls. - Enduro XD-15 ceramic ball bearings are made from pure silicon nitride material with extreme high density and uniform compaction - The race material is an advanced stainless alloy that is nitrogen infused and will not rust or corrode - Dual stage anodize black and gold machined aluminum bottom bracket cups - Kluber NBU52 grease runs better and smoother with time and is highly resistant to being washed out - Designed for use with 30mm spindles

Maximum pad life. Minimum brake fade. EXOTherm2 combines an extremely durable, smooth modulating pad compound with a cooling fin equipped back plate which provides consistent, powerful braking in all conditions. - pad wear rate is much lower than competitors - smooth, consistent brake performance - lightweight at 22 grams per pair (Disc 28 EXOTherm2) Fits: Formula: - RO Racing - T1 Racing - R1 Racing - R1 - C1 - CR3 - T1 - RO - Mega - The One - RX - RR1 - CURA

KMC X12 chains feature a double X bridge shape for fast and smooth shifting. - Compatible with SRAM 12-speed systems - Double X bridge shape with inner and outer plate chamfering for smooth and fast shifting - Mushroom riveted pins for the highest pin power and allows shifting under heavy loads - 1/2 x 11/128 - 126 Links

The SRAM RED AXS power meter breaks with tradition — and breaks through to new levels of performance. SRAM reengineered road gearing: reducing front chainring size and adding more range to the rear cassette. They also maintained a 13-tooth delta on all chainring pairs, ensuring precise shifting for any setup. This results in more useful gearing and better shifting across all configurations. These power meters are also designed with Quarq's premier DZero power measurement technology fully integrated into the crankset. Welcome to the pinnacle of the power meter. - X-Range gearing technology gives you more range and a smoother gear progression, so you're always in the right gear - Integrated power measurement - Power meter is fully integrated into the chainring set for lighter weight - Power readings are accurate within +/-1.5% and aren't affected by climate conditions during a ride - Power balance measures left and right legs separately - Improved front shifting performance for crisp and accurate front shifts - Unique chainring shape results in a lighter weight, stiffer, more durable crankset - Integrated chainring design significantly reduces weight - DUB bottom bracket adds durability, simplicity and broad compatibility - Speeds: 12 - BB Compatibility: All SRAM Road DUB BBs - BB Spindle Interface: DUB - Chainring material: Aluminum - Crank arm material: Carbon - Power Meter Type: ANT+ and BLE - Bottom bracket not included

Cane Creek headsets with Hellbender stainless steel bearings with increased sealing elements and more grease in relation to the comparable 110 bearing. - Designed to bridge the gap between the 40-series and 110-series headsets

Reliable and Durable 2-Bolt Cleat Small details make a big difference—especially when it comes to mountain biking. Worn-out cleats can lead to poor pedal function including premature or stubborn release. But swap on a new set of Shimano SM-SH51 Cleats and you know they're purpose-built to work seamlessly with nearly all Shimano SPD Pedals, delivering long-lasting performance thanks to their heat treated forged steel construction that will stand up to even the harshest riding conditions. Features: - Shimano SM-SH51 SPD Cleats come stock with all Shimano SPD pedals and are the go-to choice for mountain bikers, indoor cyclists, and anyone looking for a durable and reliable 2-bolt cleat. - Customizable: Engineered specifically to work with nearly all Shimano SPD pedals, which allow you to micro-adjust the spring force required to clip in and out of your pedals - Secure Engagement: Deliver 4 degrees of float, which assures just the right amount of movement while also providing a secure connection to your bike - Ease of Disengagement: Feature a 13-degree clip-out angle, allowing you to quickly get out of your pedals when the need arises - Built to Last: Made from heat treated forged steel that delivers durable long-lasting performance even under the most severe riding conditions PREDICTABLE ENGAGEMENT With 4 degrees of float, Shimano SM-SH51 Cleats permit just the right amount of movement for critical on-the-fly weight shifts while still delivering the secure cleat-pedal engagement needed to confidently tackle technical terrain. USER FRIENDLY Shimano SM-SH51 Cleats are compatible with nearly all Shimano SPD pedals, which allow you to micro-adjust how hard or easy it is to clip in and out, providing an unmatched level of customization. These cleats also feature a 13-degree clip-out angle, meaning with the simple outward twist of your heel you can quickly get out of your pedals when the need arises.

Featuring a universal design that allows the switch from a bolt to QR-style clamp, the Hope Seat Clamp is designed to keep your seat post in one spot and look good doing it. - Collar can be converted to QR

Replacement dropper post remote clamp. Can be used to convert existing clamp on the OneUp Dropper Remote. - Compatible with Shimano I-Spec EV (M9100, M8100, M7100) brake mounts. - Does not contain remote body.

The Rival eTap AXS wide front derailleur is optimized for smaller X-Range chainrings on wide cranks and uses Yaw technology so there's no need for trim. Its wider position on the bike also provides clearance for extra wide tires, so you can venture far beyond the beaten path. - Wireless electronic eTap shift logic for intuitive shifting, easy setup, and reliability - For wide cranksets with 43/30T chainrings - Additional clearance for 700x45c and 27.5x2.1" tires - Crisp and accurate front shifts - AXS enabled for easy personalization - Battery Not Included

Slick stainless cables undergo a polishing process to further remove imperfections. This creates a smoother surface with lower friction than PTFE-coated cables. With no coating, these are highly durable and compatible with all performance housings and lubricants. Typically used on high-end bikes, by riders wanting improved performance. Pro Polished cables eliminate the need for flaky coatings with an innovative polishing process to reduce friction and improve performance. - Polished stainless steel construction for low friction - Compatible with all performance housing and lubricants - Cables are tinted gold for easy identification

If you put in a lot of miles and/or sweat a lot, your shifter hoods probably need freshening up. Grab a pair of Shimano STI Lever Hoods to make your bike feel new again. - Fits Dura-Ace ST-R9120 levers

TEMPO ARGO R1 is a versatile endurance road saddle with a short-nose design and generous ischial support that encourages stability. Where a traditional saddle shape encourages riders to shift their position frequently for better leverage, Argo puts the rider in a more planted position, making for greater stability and better weight distribution. Tempo Argo's short length allows the rider to sit further forward without placing undue pressure on sensitive tissues. It also features an ergonomic cutout that was developed using detailed pressure analysis and input from medical experts. Argo is our most versatile saddle shape and each version suits different riding styles. As the endurance riding option, Tempo Argo has been engineered to deliver a riding feel that suits the balanced geometry of today's all-purpose road machines. The padding is made from fizik's proprietary Type 2 foam formulation, slightly thicker around the ischial sit bones area to support a more upright riding posture. The cushioning is slightly softer and more progressive than the type we use on our racing saddles, providing more long-distance comfort. Argo is a product of the fizik Concepts program, a cross-disciplinary collaboration of leading industry experts and academics carrying out research and analysis on technology, design, physiology, and bike-fitting in search of ways to improve cycling performance. - Argo: a versatile short-nose saddle that encourages stability and relieves pressure on soft tissue area - R1: a combination of a ride-compliant carbon-reinforced nylon shell and a highly stiff carbon rail - Wingflex: the shell's side edges flex and adapt to the rider's inner leg movement - Type 2 foam: progressive cushioning, with lower compression modulus SPECIFICATIONS: TEMPO ARGO R1 150 - Length: 260mm - Width: 150mm - Weight: 195g - Height at 75mm width: 43mm - Length from nose to 75mm width: 103mm - Rail: 10 x 7mm SPECIFICATIONS: TEMPO ARGO R1 160 - Length: 260mm - Width: 160mm - Weight: 202g - Height at 75mm width: 43mm - Length from nose to 75mm width: 103mm - Rail: 10 x 7mm

40-Series Bearing - Compatible with 110-, 40-, and 10-Series headsets

If you put in a lot of miles and/or sweat a lot, your shifter hoods probably need freshening up. Grab a pair of Shimano Dura-Ace STI Lever Hoods to make your bike feel new again. - Fits Dura-Ace ST-R9100 levers