Filter By:
- Bottom Brackets (29)
- Brakes/Levers/Pads (49)
- Cables (13)
- Cassettes/Freewheels (15)
- Chainrings (19)
- Chains (20)
- Cranksets (14)
- Derailleurs (14)
- Show More Categories
- Forks (3)
- Handlebar Grips/Tape (21)
- Handlebars (14)
- Headsets (3)
- Pedals (19)
- Saddles (11)
- Seatposts (11)
- Shift/Brake Combinations (3)
- Shifters (6)
- Stems (10)
- Other (80)
- Show Fewer Categories
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
- Show More Model Years
- Show Fewer Model Years
Parts
$1,575.00
The Best XC Suspension Fork in the World.
The smoothest, most advanced, most precise-handling ultralight XC fork ever made. For pure XC performance, Lefty Ocho stands alone.
Where it thrives:
XC competition, fast & challenging trails
What it's built for:
Ultimate precision and control, lightweight efficiency
Highlights:
- Ultralight carbon upper leg/aluminum lower leg
- High-flow Chamber Damper with self-balancing air spring
- Remote lockout lever
$1,575.00
Ride all over.
The ultimate built-for-gravel suspension fork with 30mm of smooth, bump-taming suspension and an incredibly stuff, precise-handling structure.
Where it thrives:
Any road it goes on, challenging trails, up and down hills
What it's built for:
Precision, control, efficiency
Highlights:
- Spring progression tunable via Ramp Rings / All Over damper for pedaling stability / 30mm of travel
- Air spring, rebound, and lockout (with blowoff), adjustments / fits: flat mount brakes and Lefty 50 hubs
- 1 1/8"-1 5" tapered steerer / Max tire size: 700c (45mm), 650b (47mm) / weight: 1340g
$1,291.00
The SRAM RED AXS power meter breaks with tradition — and breaks through to new levels of performance. SRAM reengineered road gearing: reducing front chainring size and adding more range to the rear cassette. They also maintained a 13-tooth delta on all chainring pairs, ensuring precise shifting for any setup. This results in more useful gearing and better shifting across all configurations. These power meters are also designed with Quarq's premier DZero power measurement technology fully integrated into the crankset. Welcome to the pinnacle of the power meter.
- X-Range gearing technology gives you more range and a smoother gear progression, so you're always in the right gear
- Integrated power measurement
- Power meter is fully integrated into the chainring set for lighter weight
- Power readings are accurate within +/-1.5% and aren't affected by climate conditions during a ride
- Power balance measures left and right legs separately
- Improved front shifting performance for crisp and accurate front shifts
- Unique chainring shape results in a lighter weight, stiffer, more durable crankset
- Integrated chainring design significantly reduces weight
- DUB bottom bracket adds durability, simplicity and broad compatibility
- Speeds: 12
- BB Compatibility: All SRAM Road DUB BBs
- BB Spindle Interface: DUB
- Chainring material: Aluminum
- Crank arm material: Carbon
- Power Meter Type: ANT+ and BLE
- Bottom bracket not included
$1,050.00
The best XC suspension fork in the world.
The smoothest, most advanced, most precise-handling XC fork ever made. For pure XC performance, Lefty Ocho stands alone.
Where it thrives:
In competition, challenging trails
What it's built for:
Precision, control, efficiency
Highlights:
- Lightweight aluminum upper and lower legs High-flow
- Chamber Damper with self-balancing air spring
- Remote lockout lever
$814.99
Our fastest ever shifting across SHIMANO's widest ever DURA-ACE gear range, the RD-R9250 is capable of both race wins and personal bests.
The DURA-ACE RD-R9250 integrates the system charging port and a wireless connectivity unit all while delivering super fast, precise shifting worth of any podium. A single cage length that is compatible with 28-34T low sprockets brings new versatility to the world's best road component group.
FEATURES
- Our fastest ever rear shifting, 58% faster than RD-R9150
- Compact design includes an integrated wireless unit, charger, and switch
- Adjust mode, etc.
- Wider range capacity (Max. low sprocket: 34T)
- CFRP rear derailleur plate
$779.00
Reach new goals and explore new roads with a power meter that delivers on accuracy, durability, and reliability. The Quarq DZero DUB Power Meter is paired with the Quarq DUB Crankarms and SRAM’s X-Glide 52/36t chainrings to have the perfect fit for most 10- or 11- speed groupsets. A SRAM DUB Bottom Bracket will be required for installation.
FEATURES
- Bluetooth low energy technology and ANT+ wireless data transfer
- MagicZero - automatically checks and recalibrates your power meter as you ride – no need to manually calibrate
- AxCad -- no cadence magnet required
- 10K Temperature Compensation
- Battery -- CR2032, 200-hour battery life, change without tools
- OmniCal -- swap chainrings without affecting accuracy
- 2-year warranty
- IPX7 waterproof rating
- Accuracy -- within 1.5%, measuring both legs.
SPECIFICATIONS
- Speeds: 11
- Crank arm length: 170mm, 172.5mm, 175mm
- BB Compatibility: All SRAM Road DUB BBs
- Chainring Size: 52/36T
- Bolt Circle Diameter (BCD): 110 BCD
- Chainline: n/a
- BB Spindle Interface: DUB
- Chainring material: Aluminum/Aluminum
- Guard: No Guard
- Crank arm material: Carbon
- Color (Crank arm): Natural carbon
- Power Meter Type: Spider
$769.00
All-new lever ergonomics on the DURA-ACE ST-R9270 dual control levers bring new levels comfort and control to road cycling. With our fastest wireless shifting available and even more precise brake modulation, DURA-ACE redefines performance.
Now featuring SERVO WAVE ACTION brake technology, the new DURA-ACE ST-R9270 brake lever delivers modulation and control like never before. Wireless shifting keeps your bike looking clean while offering our fastest, most precise gear changes available. All of this resides in a DUAL CONTROL LEVER to employs the most advanced materials to offer light weight and refined ergonomics that provide comfort and control for the most demanding conditions.
Clean Cockpit: Wireless connection enhances the aesthetic of your bike while keeping shifting lightning fast
1.5 to 2 years of battery life with easy-to-change CR1632 shifter batteries
Unparalleled ergonomics engineering refined with pros' feedback
- Raised hood peak improves ergonomics, while a longer hood body increases hand support
- Compatible with satellite shifters
SERVO WAVE technology optimizes brake control
- Lighter, smoother lever action
- Enhanced modulation thanks to an expanded braking control area
Advanced Materials
- Carbon fiber brake lever and titanium hardware
Compatible with wired connection (for e-bike application)
Make DURA-ACE yours with custom button function and adjustable ergonomics
- Easily change button function with the E-TUBE app
- Find your optimum lever position with simple reach adjust
$764.00
The heart of the connected cadre. The SRAM RED eTap AXS rear derailleur is AXS enabled for easy personalization and designed for both 1x and 2x systems. Advanced chain management keeps it silent and secure no matter the terrain. The derailleur also comes with faster pulleys, bearings, motors, and signals, improving speed in every way.
- SRAM AXS-enabled for easy personalization
- Orbit chain management technology keeps drivetrain quiet and secure
- A single rear derailleur for all gearing combinations, including 1x and 2x
- Improved motor and signal travel for faster shifting
- Larger X-SYNC pulleys and ceramic bearings for increased durability and efficiency
- Compatible with existing eTap batteries
- Battery sold separately
$749.00
If your ride doesn't feel complete until you get a little dirt on your tires, you know the importance of capable components that can tackle anything. The RED XPLR eTap AXS rear derailleur is a dedicated 1x-specific unit designed for use with the XPLR 10-44 cassette. It makes for an uncluttered drivetrain that takes on pavement and singletrack with equal aplomb. Wireless and proven eTap shift logic, AXS connectivity and advanced chain management mean this derailleur does exactly what you want when you need it.
- Wireless electronic eTap shift logic for intuitive shifting, easy setup, and reliability
- 1x specific for use with 10-44T XPLR and 10-36T cassettes
- SRAM AXS enabled, allowing easy personalization
- Chain management keeps the drivetrain quiet and secure
- Large X-SYNC pulleys for increased durability and efficiency
- Compatible with existing eTap batteries
- Cage Material (RD): Aluminum
- Pulley Bearings Material: Ceramic
- Max Tooth: 44
NOTE: Does not include eTap battery. Compatible with existing eTap batteries.
$633.00
The new Reverb AXS XPLR dropper post delivers more control, confidence, and fun on gravel roads everywhere. Getting the saddle out of the way means more room to move, saving you from awkward maneuvering and sketchy descents. We created an all-new design complete with lightweight air-only internals featuring built-in compliance we call ActiveRide. It's like travel for your saddle. Enabled by SRAM AXS technology, Reverb AXS XPLR is part of the ultimate personalized cockpit.
- New 27.2mm Reverb AXS XPLR delivers more control, confidence, and fun for gravel
- ActiveRide—Air only internals provide a fully rigid top-out position. With the touch of your AXS controller, you've got built-in compliance to ensure comfort and control over the roughest sections of gravel
- Two travel options to choose—50mm or 75mm
- Saddle clamp options compatible with 7x10 oval carbon rails.
- Seat post length includes 400mm and 350mm (50mm drop only)
- AXS Technology allows rider customization via the AXS Mobile App
- AXS handlebar controls (drop or flat bar)
- Shared battery with all other SRAM AXS enabled components
- System is completely waterproof and dustproof to IP69K—take it anywhere
- SRAM AXS battery and charger included
SPECIFICATIONS:
- TRAVEL: 50mm, 75mm
- POST DIAMETER: 27.2mm
- POST LENGTH: 350mm, 400mm
- REMOTE: AXS Controller Sold Separately
- SADDLE RAIL COMPATIBILITY: Round/Oval (7x9 & 7x10), Round/Oval (7x9)
- WEIGHT (G): 562
- WEIGHT BASED ON: 75mm Travel 400mm Length W/O battery - Battery 25g
$625.00
The Shimano Dura-Ace FC-R9200 crank performs two vital functions; transferring your pedaling effort into the drivetrain and ensuring the fastest, most precise front shifting available. With HOLLOWTECH II crank arms to ensure light weight and Shimano's class-leading chainring designs, the FC-R9200 won't let you down.
- Optimal balance of stiffness, strength, weight and rotational performance
- HOLLOWGLIDE structure cuts weight yet maintains strength for better power transfer and quicker, more precise front shifting
- 148mm Q-factor
- 44.5mm chainline
$550.00
Featuring Servo Wave Action brake technology, the Shimano Dura-Ace ST-R9270 brake lever delivers modulation and control like never before. Wireless shifting keeps your bike looking clean while offering the fastest, most precise gear changes available. All of this resides in a dual control lever that employs the most advanced materials to offer lightweight and refined ergonomics that provide comfort and control for the most demanding conditions.
- The wireless connection provides a clean cockpit, enhancing the aesthetic of your bike while keeping shifting lightning fast
- 1.5 to 2 years of battery life with easy-to-change CR1632 shifter batteries
- Unparalleled ergonomics engineering refined with pro rider feedback
- Raised hood peak improves ergonomics, while a longer hood body increases hand support
- Compatible with satellite shifters
- Servo-Wave technology optimizes brake control
- Lighter, smoother lever action
- Enhanced modulation thanks to an expanded braking control area
- Carbon fiber brake lever and titanium hardware
$539.99
The new Gen 3 single-sided Stages Power L meter is built on to a non-drive-side FSA SL-K BB30 crank arm.
Tour Proven. Stages Power has carried riders to three consecutive Tour de France victories, plus many more world and national championships. If you believe racing provides the world’s best product proving ground, then Stages Power is proven as the world’s best power meter.
Active Temperature Compensation as standard equipment. Consistency of measurement is the most important feature of a power meter. Stages Power was the first meter to make temperature compensation an automatic process ensuring accurate readings no matter the environmental conditions.
Individual meter calibration for the most accurate results. Stages Power meters are calibrated individually to ensure a +/- 1.5% accuracy level. Individual calibration means that you can trust the data produced by our system.
Additional features:
- ± 1.5 % accuracy in all conditions
- Active temperature compensation
- Accelerometer based cadence measurement
- Wirelessly upgradable firmware
- LED indicator displays battery level at start up (with no need for connect to an app) and confirms successful zero reset
- Updated accelerometer and addition of gyroscope for improved cadence resolution
- Upgraded BLE and ANT+ radios offer a 6X improvement of data transmission strength
Specifications
- Power meter housing: low profile design, with robust door interface
- Weight: Only adds 15g to base crank arm
- Battery Life: 200+ hours (coin cell: CR2032) when used as a single sided meter
- Power range (Watts): 0 to 5000
- Cadence range (rpm): 10-220
- Water resistance rating: IPX7
In the box
- Power Meter
- High quality CR2032 coin cell battery
- Lifetime access to Stages Link for power meter management and firmware upgrades.
- 2 months free access to Stages Link premium training and coaching features.
- Product Identification Card with Serial Number and ANT+ I.D. Number.
- User Guide
$450.00
Despite its smaller, lighter design, the Shimano Dura-Ace FD-R9250 offers ultra-fast front shifting.
- Fast Di2 shifting performance
- Smaller, sleeker, lighter
- Frontal area is smaller than previous designs to reduce aerodynamic drag
- Top gear teeth capacity: 50-55t
- 61-66 degree chainstay angle
- Includes 1 SD300 port
$410.00
With the fast and accurate Di2 shifting technology, the Shimano 12-speed Ultegra RD-R8150 rear derailleur is extremely versatile thanks to a single cage length option compatible with 11-28, 11-30, and 11-34 cassettes.
- Compact design includes an integrated wireless unit, charger, switch
- Wider range capacity
- Max. low sprocket 34t
- LED status indicator
- Battery indicator, pairing, adjust mode etc.
$399.99
SL-K modular BB386EVO is the latest FSA crankset for gravel, adventure, or road use. Thanks to the adaptable BB386 EVO 30mm spindle, this modular system will fit a wide variety of frames with a range of BB standards.
- Hollow carbon fiber arms with UD finish
- Forged AL7050 BB386EVO spindle
- Direct mount outer chainring and BCD 90 inner chainrings
- Chromoly chainring bolts
- Fits Shimano and SRAM 10-11 speed systems
$399.99
The Pro Vibe Aero handlebar is built to meet cycling’s highest demands using state of the art technology. It's an ultra-high performance handlebar constructed with Innegra fibers to ride the most punishing conditions and is designed with aerofoil shapes to give you a performance edge on the road. The Vibe Aero is developed with Di2 in mind offering ultimate integration for maximum aerodynamic performance and ultra-clean styling.
- Full UD Carbon aerodynamic design that meets UCI requirements
- Integrated brake, shift, and Di2 cable routing
$379.99
An ultra-high performance handlebar constructed with Innegra fibers to ride the most punishing conditions. The PRO Vibe handlebar is built to meet cycling’s highest demands using state of the art technology. The Vibe is developed with Di2 in mind offering ultimate integration for maximum aerodynamic performance and ultra-clean styling. The carbon PRO Vibe handlebar series is constructed from high-performance Innegra fiber. The addition of Innegra fibers strengthens the bar’s most vulnerable areas without compromising its weight, so your handlebar is ready to ride the harshest conditions.
- UD carbon construction
- Integrated brake and shift cable routing (Also for Shimano Di2)
- Anatomic and compact design
$377.00
The workhorse of X-Range gearing, the SRAM RED XG-1290 cassette progresses fluidly and quickly through a wider range of gears. It's specifically designed for wireless electronic shifting and the one-piece design offers you the best in weight savings.
- Updated design for smoother and faster shifting
- More gradual gear progression between cogs—at least five one-tooth jumps—while still offering a wider range
- 10-tooth start helps provide a wider gearing range
- Designed to work with an XDR driver body
- One-piece machined steel X-Dome design for weight savings
- All Zipp wheels starting from 2012 are XDR ready
- Version: D1
- 10-26T: 10, 11, 12, 13, 14, 15, 16, 17, 19, 21, 23, 26
- 10-28T: 10, 11, 12, 13, 14, 15, 16, 17, 19, 21, 24, 28
- 10-33T: 10, 11, 12, 13, 14, 15, 17, 19, 21, 24, 28, 33
$369.00
If your ride doesn't feel complete until you get a little dirt on your tires, you know the importance of capable components that can tackle anything. The Force XPLR eTap AXS rear derailleur is a dedicated 1x-specific unit designed for use with the XPLR 10-44 cassette. It makes for an uncluttered drivetrain that takes on pavement and singletrack with equal aplomb. Wireless and proven eTap shift logic, AXS connectivity, and advanced chain management mean this derailleur does exactly what you want when you need it.
NOTE: Does not include eTap battery or charger. Compatible with existing eTap batteries.
- Wireless electronic eTap shift logic for intuitive shifting, easy setup, and reliability
- 1x specific for use with 10-44T XPLR and 10-36T cassettes
- SRAM AXS enabled, allowing easy personalization
- Chain management keeps the drivetrain quiet and secure
- Large X-SYNC pulleys for increased durability and efficiency
- Cage Material (RD): Aluminum
- Pulley Bearings Material: Steel
- Max Tooth: 44
NOTE: Does not include eTap battery. Compatible with existing eTap batteries.
$360.00
The uninterrupted shifting experience of the Shimano Dura-Ace R9200 12-speed cassette range lets you climb, sprint, and push your limits without stopping to think about your next gear change. Larger driving cogs maximize drivetrain efficiency and create compatibility with both Shimano 11 and 12-speed freehub bodies. Shimano HYPERGLIDE+ technology is integrated to provide seamless shifts both up and down the gear range.
- Faster, seamless shifts under maximum pedaling load
- Refined 12 step gear combination provides peak efficiency and accelerating performance for every situation
- Compatible with 12-speed and road 11-speed freehub body
$359.00
The proven Transfer seatpost gets lighter and tighter. Completely redesigned from the ground up, with improved serviceability, decreased weight, reduced length, and decreased insertion depth.
"Factory" says it all. The best-of-the-best technology we have to offer is available in our Factory Series models with our buttery smooth, ultra-durable Genuine Kashima Coat. These products are World Cup proven.
The Transfer continues the excellent reputation of smooth function and great reliability with an infinitely adjustable height design, and internal or external cable routing options. Low lever force and great modulation make it easy to regulate return speed and small height adjustments. The Factory Series Transfer features Genuine Kashima Coating for maximum performance.
- Cable actuated with tool-free quick disconnect for easier installation and removal
- Low lever force provides consistent actuation pressure even with saddle weighted or unweighted
- Easy to modulate return speed with lever
- Factory Series models feature Genuine Kashima Coat
- Remote lever sold separately
$325.00
Waste not, want KN0T.
Paired with a KN0T or SAVE SystemStem, you'll save at least six watts over a traditional round handlebar. Not only that, you can adjust your bar position—go on, have it all.
Where it thrives:
The open road, up and down hills
What it's built for:
Aerodynamics, precision, control
Highlights:
- One-piece looks, two-piece function
- Hides cables
- Wind tunnel proven
$319.99
Performance suspension seatposts designed to add comfort and compliance to any bike without adding unnecessary weight. With 35mm of travel, the eeSilk+ is a suspension seatpost designed to noticeably soften any gravel or mixed-surface road. These posts make great enhancements to gravel or mixed surface bikes by reducing the chatter transmitted from the surface to the rider and can be tuned to rider weight through a simple elastomer change. #5 elastomer comes pre-installed, other weight elastomers sold separately
- Travel: 35mm
- Length: 362mm
- Weight: 323g (27.2mm), 333g (31.6mm)
- Max Rider Weight: 250lbs
- Offset: 12mm
- Minimum Extension: 80mm
- Maximum Extension: 287mm
$315.00
Get the DownLow.
Our DownLow dropper post is an infinitely adjustable, easily serviceable, air/hydraulic unit with a sweet cable remote. It goes up. It goes down. You need one.
Where it thrives:
Challenging trails, up and down hills
What it's built for:
Handling, confidence
Highlights:
- 31.6 diameter
- Alloy construction with slot key bushings and wiper seals
- Preset airspring for no-fuss setup
$314.95
When Tom Ritchey steps outside his door and clips into his bike, he seldom has a plan for that day's ride. He might head right to the trails close to his house for an afternoon of ripping singletrack, or he might be gone for several hours on a brisk road ride. There's also a good chance he'll spend a lot of time on the gravel roads that link his favorite trails to long stretches of tarmac.
In order to take full advantage of this diverse mix of riding surfaces, it's important to have the tools that are up for the job. That's the idea behind the Ritchey WCS Carbon ErgoMax handlebar.
As with the popular original ErgoMax, the new WCS Carbon version of this adaptable handblebar is designed to enhance control and comfort when riding along any riding surface thrown at it. The new WCS Carbon ErgoMax is an ideal bar for riding along loose and dirty surfaces since it places the hands in a wider, more stable position while in the drops. Yet, it's just as perfectly situated on road bikes for endurance rides along smooth, clean tarmac - its ergonomics deliver unparalleled comfort.
The 15mm rise at the clamping area offers a slightly more upright riding position, while a 5° backsweep and ergo aero tops reduce arm and hand fatigue. The 12° drop flare keeps the rider’s hands in a comfortable and confident position while also adding a bit more unobstructed stability when turning or for those out-of-the-saddle efforts. And, of course, the carbon fiber construction of the new ErgoMax helps mute road (and gravel) vibration, offers internal cable routing, and keeps the weight low.
$299.99
The Hellbender 110 Bottom Bracket provides an incredible mix of performance and longevity through the inclusion of Enduro XD-15 ceramic bearings. These bearings feature nitrogen infused stainless steel races that will not rust or corrode paired with Silicon Nitride ceramic balls.
- Enduro XD-15 ceramic ball bearings are made from pure silicon nitride material with extreme high density and uniform compaction
- The race material is an advanced stainless alloy that is nitrogen infused and will not rust or corrode
- Dual stage anodize black and gold machined aluminum bottom bracket cups
- Kluber NBU52 grease runs better and smoother with time and is highly resistant to being washed out
- Designed for use with 30mm spindles
$299.99
Get your saddle down and out of the way and up your technical skills with a game-changing dropper. The Koryak Internal dropper routes cables through the frame for a clean, snag-free assembly.
- AL-7000 series aluminum
- Infinite travel 150mm
- Internal cable routing
$285.00
Level Ultimate is the master of two forces—power and weight—in one sleek, durable design. In this build, we took every gram to task. Carbon-fiber lever blades for crisp, clean pulls. A new two-piece, two-piston caliper for superior heat management and smooth piston actuation. With Ultimate, total control is at your fingertips.
- Modern XC power for today's most demanding races
- Pivot bearings offer crisp lever feel and a fatigue-free ride
- Engineered for easy installation and maintenance
$280.00
- Excellent Pedaling Efficiency
- Optimized Balance Of Weight And Rigidity
- Injection Molded Carbon Composite Body
- Hollow Cleat Bolt
- Efficient Power Transfer
- High Stability
- Extra-Wide Platform
- Efficient Power Transfer/Durability
- Reduces Flex And Pedal Body Wear
- Stainless Steel Body Plate
- Excellent Pedaling Efficiency
- Smooth Rotation
- 2-Ball Bearing, 1-Wide Roller Bushing
- Reliable Durability Performance
- Stable And Uniform Load Distribution
- Wide Bearing Placement
- Rider Tune
- Customize The Entry And Release Tension Settings
- Adjustable Entry And Release Tension Settings
- Shimano 3-Year Limited Warranty
- Average Weight: 224g
- Shimano SPD-SL cleats included
- Standard (52mm)
- Wide (56mm)
Page 1 of 12
Next page