Designed to store the essentials to repair a mid-ride mechanical, our Expedition Tool Pack is a sleek, ultra-compact pack that’s excellent for short rides and bikepacking adventures. Fitting neatly under the saddle, the tool bag attaches securely to the bike with a Velcro-backed Hypalon strap that’s effective even when exposed to road spray and grit – a weakness of traditional zippers and buckles. Inside, there’s enough capacity for two spare road tubes, tire levers, a small multi-tool, and a CO2 canister. The exterior of the tool bag is protected by a tough, lightweight fabric that’s completely waterproof. Reflective graphics and a light attachment point add visibility in low light. Features - Ultralight construction, weighing only 40g - Hypalon-reinforced Velcro strap gives a secure hold in all conditions - Wide opening, allowing easy access to contents when detached - Light attachment point and reflective graphics for increased visibility - Lightweight waterproof laminate, developed specifically for Apidura Materials - The tool bag is cut from a three-layer laminate fabric that was developed specifically for Apidura. The material is lightweight, and is highly resistant to tears and abrasion. Notably, it’s welded together at the seams, creating a watertight seal that ensures complete waterproofing. - The tool bag’s strap is reinforced with Hypalon, a rubberized nylon used to provide extra protection against friction and abrasion. Care - Wash the tool bag by hand, using a mild diluted soap if necessary. Afterwards, let it air dry. - Do not machine wash, machine dry, or iron.
$38.00 - $42.00
Pack it up. - Contain QR saddle bags offer simple and effective solutions to keep your essentials stored securely and easy to access. Where it thrives - On the bike, out in the elements What it's built for - Convenience, durability Highlights - Quick-Release T-Bracket twists and locks onto saddle rails - Waterproof nylon construction and zippers - Rubberized fabric with a light clip/strap
$28.00 - $30.00
- Material: water-resistant nylon - Mount: saddle/seatpost - Pockets: 1 internal - Closure: zip
Seat Roll Asymmetrico takes everything we've learned in 5 years of producing the award-winning Seat Roll Premio and kicks it up a notch with lighter materials, reduced bulk, improved abrasion resistance, an extra pocket, and a unique asymmetric design which allows you to pack more into a smaller volume, oh, and room for up to 700x45 (29x1.75") tubes! - 2-Ply Ballistic Nylon Construction with Hypalon outer jacket - Boa L6 Closure System with Lace Guide - Padded Rail Guard protects saddle rails and speeds Installation - FOUR internal pockets: Holds tubes up to 700x45mm - Black reflective printing provide stealthy HI-VIS in low-light conditions - Weight: 85 grams
Named after the Italian word for Brick, Mattone is a water-resistant, ultra-compact seat bag that attaches to the rails using the BOA Closure System. Unique zipper design allows it to be accessed while on the bike, or to open like a book when removed from the bike for easy access. Mattone is for the cyclist looking to carry a spare tube, CO2, multi-tool, and some cash in a discreet, water-resistant package. Internal divider holds ID, credit card, or cash while also protecting your tube from your multi-tool! Seat bag users fall into two categories: Seat Roll aficionados and seat bag users. Traditionally, seat bags have been simple open spaces that allowed content to jangle about, making noise and rubbing against each other. Often times a spare tube was pulled out of a seat bag to reveal it was more full of holes than the tube being replaced due to friction against a house key or multi-tool. With Mattone, we designed a layout similar to a book, where the bag can fully open to hold the tube and CO2 cartridge on one side, separated by a padded ballistic nylon 'page' separating it from the other side where you can store an inflator head, multi-tool, contact lens case, etc. The 'page' also contains a slot for a credit card, ID, money, or house key. The unique off-center Aquaguard Zipper allows the case to completely open and lay flat when off the bike, while also allowing easy access to the multi-tool and money/card slots when on the bike without risk of spilling all the contents of the bag. A high-friction Hypalon strap with BOA Closure completes the package. Making more than 15x the power of Velcro, the BOA Closure uses a ratcheting mechanism that will not creep or loosen even under the most extreme vibration and impact. This ensures the Mattone will remain 'high and tight' under your saddle until you need to access it...no swinging, swaying, or rattling...ever. - Exterior—Sleek black finish with reflective graphics - Interior—Hi-contrast red material with separate ID, credit card, or money flap - Interior Volume—Holds one inner tube, one CO2 cartridge, one tire lever (all of these components are sold separately and are not included) - BOA Closure System with open guide release on Hypalon retaining strap - YKK Aquaguard zipper - Outside Dimensions: 13cm x 8.5cm x 5.5cm - Volume: Approximately .61 L - Strap Measurements: 27cm x 4.5cm
$158.00 - $175.00
The Expedition Saddle Pack is lightweight, waterproof, and provides a spacious compartment under the saddle, eliminating the need for a rear rack. It’s designed to hold clothes and equipment on long distance rides. Built from a lightweight laminate developed specifically for Apidura, the Pack is highly resistant to abrasions and tears. The seams have been welded together, creating a waterproof seal that ensures contents always stay dry, even in sustained rain. A three-point attachment system with Hypalon-reinforced Velcro straps allows the Pack to hug the seat post, increasing stability and cutting down on lateral movement. Additional Hypalon on the Pack’s body keeps frames in good condition. The roll-down compression and closure system means the Pack’s volume can be tailored precisely to fit a range of packing needs. Materials The Expedition Saddle Pack is cut from a three-layer laminate fabric that was developed specifically for us. The material is lightweight, and is highly resistant to tears and abrasion. Notably, it’s welded together at the seams, creating a watertight seal that ensures complete waterproofing. The Pack’s attachment points are reinforced with Hypalon, a rubberized nylon used to provide extra protection against friction and abrasion. For the straps, Woojin buckles have been chosen for their strength and reliability. Finally, a lightweight moulded section of HDPE thermoplastic sits in the Pack’s lower section to reinforce its structure.
Page 1 of 1